User`s manual

ManualsBrandsYASKAWA ManualsConsumer electronicsVarispeed G7

8 APPENDIX

Command Code Description Drive

Read Write BIT Display F7 G7

Alarm Description 2 Yes Yes

0 DEV Excessive Speed Deviation Yes Yes

1 PGO PG Disconnect Detection Yes Yes

2 OPR Digital Operator Connection Error Yes Yes

3 CE Memobus Communication Error Yes Yes

4 BUS Option Card Communication Error Yes Yes

5 CALL Waiting for Data via Communications Yes Yes

6 OL1 Motor Overload Yes Yes

7 OL2 Inverter Overload Yes Yes

8 - Not Used - -

9 EFO During Comm. Option Card External Fault Detection Yes Yes

A - Motor Switch During Run Yes Yes

101AH -

B-F - Not Used - -

Drive Status Yes Yes

0 1: During Run Yes Yes

1 1: While in Reverse Yes Yes

2 1: Drive Ready Yes Yes

3 1: Fault Yes Yes

4 1: Data Setting Error Yes Yes

5 1: Multi-Function Relay Output (M1-M2) ON Yes Yes

6 1: Multi-Function PH C1 Output (P1-PC) ON Yes Yes

7 1: Multi-Function PH C2 Output (P2-PC) ON Yes Yes

8 1: Multi-Function PH C3 Output (P3-C3) ON No Yes

9 1: Multi-Function PH C4 Output (P4-C4) ON No Yes

1020H -

A-F

ot Used - -

Fault Description Yes Yes

0 Overcurrent (OC) Ground (GF) Yes Yes

1 Main Circuit Overvoltage (OV) Yes Yes

2 Inverter Overload (OL) Yes Yes

3 Heat Sink Overheat, Inverter Internal Cooling Fan Stop (OH (OH1)) Yes Yes

4 Internal Braking Transistor Fault (Rr) Installed Braking Resistor Overheat (Rh) Yes Yes

5 Fuse Blown (PUF) Yes Yes

6 PID Feedback Command Loss (FBL) Yes Yes

7 External Fault (EF0, EF3~EF7) Yes Yes

8 Hardware Fault (CPF) Yes Yes

9 Motor Overload (OL1), Overtorque Detection 1 (OL3), Overtorque Detection 2

(OL4)

Yes Yes

A PG Disconnect Detection (PGO), Overspeed (OS), Excessive Speed Deviation

(DEV)

Yes Yes

B Main Circuit Undervoltage (UV) During Detection Yes Yes

Main Circuit Undervoltage / MC Operation Error (UV1) Control Power Supply

Fault (UV2)

Inrush Prevention Circuit Fault (UV3)

Yes Yes

D Output Phase (LF) Yes Yes

E Memobus Comm. Error Yes Yes

1021H -

F Operator Connection Error (OPR) Yes Yes

Data Link Status Yes Yes

0 While Saving Data Yes Yes

1 Not Used - -

2 Not Used - -

3 Upper/Lower Limit Fault Yes Yes

4 Data Compatibility Fault Yes Yes

1022H -

5-F Not Used - -