User`s manual

ManualsBrandsYASKAWA ManualsConsumer electronicsVarispeed G7

8.1.3 Monitor Data (read only)

For more details, refer to the instruction manual. The digital operator displays the same units as the monitor, with the

exception of the units for the output current and frequency related units.

• U1-xx Monitor Details

Command Code Description Drive

Read Write BIT F7 G7

1040H - U1-01 Frequency Reference

Yes Yes

1041H - U1-02 Output Frequency

Yes Yes

1042H - U1-03 Output Current (100%/8192)

Yes Yes

1043H - U1-04 Control Mode Yes Yes

1044H - U1-05 Motor Speed

Yes Yes

1045H - U1-06 Output Voltage Command Yes Yes

1046H - U1-07 Main Circuit DC Voltage Yes Yes

1047H - U1-08 Output Power Yes Yes

1048H - U1-09 Torque Reference (Internal) Yes Yes

Input Terminal Status Yes Yes

0 1: Control Circuit Terminal S1 Closed Yes Yes

1 1: Control Circuit Terminal S2 Closed Yes Yes

2 1: Control Circuit Terminal S3 Closed Yes Yes

3 1: Control Circuit Terminal S4 Closed Yes Yes

4 1: Control Circuit Terminal S5 Closed Yes Yes

5 1: Control Circuit Terminal S6 Closed Yes Yes

6 1: Control Circuit Terminal S7 Closed Yes Yes

7 1: Control Circuit Terminal S8 Closed No Yes

1049H - U1-10

8-F Not Used - -

Output Terminal Status Yes Yes

0 1: Control Circuit Terminal M1-M2 Closed Yes Yes

1 1: Control Circuit Terminal P1 Closed Yes Yes

2 1: Control Circuit Terminal P2 Closed Yes Yes

3 1: Control Circuit Terminal P3 Closed No Yes

4 1: Control Circuit Terminal P4 Closed No Yes

5-6 Not Used - -

104AH - U1-11

7 1: Terminal MA/ MB-MC Closed Yes Yes

Operation Status Yes Yes

0 1: During Run Yes Yes

1 1: At Zero Speed Yes Yes

2 1: While in REV Yes Yes

3 1: Reset Signal During Input Yes Yes

4 1: During Speed Agree Yes Yes

5 1: Drive Ready Yes Yes

6 1: Alarm Yes Yes

104BH - U1-12

7 1: Fault Yes Yes

104CH - U1-13 Cumulative Operation Time Yes Yes

104DH - U1-14 Software Number (FLASH) Yes Yes

104EH - U1-15 Frequency Reference Terminal A1 Input Voltage Yes Yes

104FH - U1-16 Multi-Function Analog Input Terminal A2 Input Voltage Yes Yes

1050H - U1-17 Multi-Function Analog Input Terminal A3 Input Voltage No Yes