Instruction manual

140
Press to stop the COPY function.
The following constants are not written if the Inverter capacities differ.
Constants added with software version upgrades will not be written
between VS-606V7 Inverters without the additional constants and VS-
606V7 Inverters with the additional constans.
For this reason, the settings for the additional constants will not be
changed by the copy operation.
Example: Writing Constants from EEPROM in Operator to Inverter
Constant No. Name Constant No. Name
n011 to n017 V/f Settings n108 Motor Leakage Inductance
n036 Motor Rated Current n109 Torque Compensation Volt-
age Limiter
n080 Carrier Frequency Selection n110 Motor No-load Current
n105 Torque Compensation Iron
Loss
n140 Energy-saving Coefficient
K2
n106 Motor Rated Slip n158 Motor Code
n107 Motor Line-to-neutral Resis-
tance
Explanation Operator Display
• Enable the set-
tings for con-
stants n001 to
n179.
• Press to lit
.
• Press to dis-
play the set value.
• Change the set value to 4
by pressing the or
key.
• Press .
(May be a different constant No.)
(Lit)
(May be a different set value.)
(Flashes)
(Lit for one second.)
↓
(The constant No. is displayed.)
STOP/RESET
DSPL
PRGM
ENTER
ENTER