Instruction manual

196
 Constants List
• Addition of Constants Accompained by the Upgraded Software
Version
The constants marked with #1, #2, and #3 are applicable for the fol-
lowing upgraded software version Nos.:
#1: Applicable for software version No. VSP010015 or later
#2: Applicable for software version No. VSP010020 or later
#3: Applicable for software version No. VSP010024 or later
#4: Applicable for software version No.VSP010028 or later.
First Functions (Constants n001 to n049)
No. Register
No. for
Trans-
mission
Name Setting Range Setting Unit Factory
Setting
Change
during
Opera-
tion
User
Set-
ting
Ref.
Page
001 0101H Password 0 to 4, 6, 8, 9 - 1 No 53
002 0102 Control Mode Selection (Note
6)
0, 1 - 0
(Note 1)
No 58
003 0103 RUN Command Selection 0 to 3 - 0 No 63
004 0104 Frequency Reference Selec-
tion
0 to 9 - 0
(Note 5)
No 64
005 0105 Stopping Method Selection 0, 1 - 0 No 85
006 0106 Reverse Run Prohibit 0, 1 - 0 No 65
007 0107 Stop Key Selection 0, 1 - 0 No 84
008 0108 Frequency Reference Selec-
tion in Local Mode
0, 1 - 0
(Note 5)
No 64
009 0109 Frequency Reference Setting
Method From Digital Operator
0, 1 - 0 No 64
010 010A Detecting Fault Contact of
Digital Operator
0, 1 - 0 No 63
011 010B Max. Output Frequency 50.0 to 400.0
Hz
0.1 Hz 60.0 Hz No 55
012 010C Max. Voltage 0.1 to 255.0 V
(Note 2)
0.1 V 200.0 V
(Note 2)
No 55
013 010D Max. Voltage Output
Frequency
0.2 to 400.0 Hz 0.1 Hz 60.0 Hz No 55
014 010E Mid. Output Frequency 0.1 to 399.9 Hz 0.1 Hz 1.5 Hz
(Note 6)
No 55
015 010F Mid. Output Frequency Volt-
age
0.1 to 255.0 V
(Note 2)
0.1 V 12.0 V
(Note 2,
6)
No 55