Instruction manual

200
060 013C Analog Frequency Reference
Gain
0 % to 255 % 1 % 100 % Yes 67
061 013D Analog Frequency Reference
Bias
-100 % to 100
%
1 % 0 % Yes 67
062 013E Filter Time Constant for Ana-
log Frequency Reference
0.00 to 2.00 s 0.01 s 0.10 s Yes -
064
#3
0140 Frequency Reference Loss
Detection
Selection
0, 1 - 0 No 149
065 0141 Monitor Output Type 0, 1 - 0 No 78
066 0142 Monitor Item Selection 0 to 5, 6#3 - 0 No 77
067 0143 Monitor Gain 0.00 to 2.00 0.01 1.00 Yes 78
068 0144 Analog Frequency Reference
Gain (Voltage input from Oper-
ator)
−255% to
255%
1% 100% Yes -
069 0145 Analog Frequency Reference
Bias (Voltage input from Oper-
ator)
−100% to
100%
1% 0% Yes -
070 0146 Analog Frequency Reference
Filter Time Constant (Voltage
input from Operator)
0.00 to 2.00 s 0.01 s 0.10 s Yes -
071 0147 Analog Frequency Reference
Gain
(Voltage input from Operator)
−255% to
255%
1% 100% Yes -
072 0148 Analog Frequency Reference
Bias
(Current input from Operator)
−100% to
100%
1% 0% Yes -
073 0149 Analog Frequency Reference
Filter Time Constant (Current
input from Operator)
0.00 to 2.00 s 0.01 s 0.10 s Yes -
074 014A Pulse Train Frequency Refer-
ence Gain
0 % to 255 % 1 % 100 % Yes -
075 014B Pulse Train Frequency Refer-
ence Bias
-100 % to 100
%
1 % 0 % Yes -
076 014C Pulse Train Frequency Filter
Time Constant
0.00 to 2.00 s 0.01 s 0.10 s Yes -
077
#2
014D Multi-function Analog Input
Function
0 to 4 - 0 No 93
078
#2
014E Multi-function Analog Input
Signal Selection
0, 1 - 0 No 92
079
#2
014F Frequency Reference Bias
(FBIAS) Value
0 % to 50 % 1 % 10 % No 92
No. Register
No. for
Trans-
mission
Name Setting Range Setting Unit Factory
Setting
Change
during
Opera-
tion
User
Set-
ting
Ref.
Page