Instruction manual

5. Operating the Inverter

 Description of Status Indicators

There are two Inverter operation status indicators on the middle right

section of the face of the VS-606V7. The combinations of these indica-

tors indicate the status of the Inverter (ON, flashing, and OFF). RUN

indicator and status indicator on the button have the same func-

tion.

For details on how the status indicators function for Inverter faults, refer

to Chapter 8. Fault Diagnosis. If a fault occurs, the ALARM indicator

will lit.

The fault can be reset by turning ON the FAULT RESET sig-

nal (or by pressing the key on the Digital Operator)

with the operation signal OFF, or by turning OFF the power

supply. If the operation signal is ON, the fault cannot be reset

using the FAULT RESET signal.

:ON

:Flashing (long flashing) :Flashing :OFF

RUN

ALARM

(Green)

(Red)

Operation ready

(During stop)

Ramp to

stop

Normal

operation

NOTE