Instruction manual

4
RECEIVING THE PRODUCT
MOUNTING
(Ref. page)
• Do not install or operate any Inverter that is
damaged or has missing parts.
Failure to observe this caution may result in injury or
equipment damage.
20
(Ref. page)
• Lift the Inverter by the heatsinks. When moving
the Inverter, never lift it by the plastic case or the
terminal cover.
Otherwise, the main unit may fall and be damaged.
26
• Mount the Inverter on nonflammable material
(i.e., metal).
Failure to observe this caution may result in a fire.
25
• When mounting Inverters in an enclosure, install
a fan or other cooling device to keep the intake
air temperature below 50°C for IP20 (open
chassis type), or below 40°C for NEMA 1 (TYPE
1).
Overheating may cause a fire or damage the Inverter.
25
• The VS-606V7 generates heat. For effective
cooling, mount it vertically.
Refer to the figure in Mounting Dimensions on
page
26.
26
CAUTION
CAUTION