Instruction manual

 How to Select LOCAL/REMOTE Mode

 Selecting RUN/STOP Commands

Refer to Switching LOCAL/REMOTE Mode (page 61) to select either

the LOCAL mode or REMOTE mode.

The operation method (RUN/STOP commands, FWD/REV RUN com-

mands) can be selected using the following method.

 LOCAL Mode

When Lo (local mode) is selected for Digital Operator ON

mode, or when the LOCAL/REMOTE switching function is set and the

input terminals are turned ON, run operation is enabled by the or

on the Digital Operator, and FWD/REV is enabled by the

ON mode (using or key).

When LOCAL/REMOTE

switching function is not

set for multi-function

input selection

(When 17 is not set

for any of constants

n050 to n056)

Select Lo for

operator

LO/RE

selection.

Select rE for

operator

LO/RE

selection.

When LOCAL/REMOTE

switching function is set

for multi-function input

selection

(When 17 is set for

any of constants

n050 to n056)

Turn ON multi-

function input

terminal.

Turn OFF multi-

function input

terminal.

REMOTE mode

LOCAL mode

STOP