Instruction manual

n050 = 1 (Input terminal S1) (Factory Setting)

n051 = 2 (Input terminal S2) (Factory Setting)

n052 = 3 (Input terminal S3) (Factory Setting)

n053 = 5 (Input terminal S4) (Factory Setting)

n054 = 6 (Input terminal S5) (Factory Setting)

n055 = 7 (Input terminal S6) (Factory Setting)

n056 = 8 (Input terminal S7) (Change the setting to 8.)

16-step speed operation

Set frequency references 9-16 for n120 to n127.

Set the input terminal for a multi-step speed reference using the multi-

function input selection.

 Operating at Low Speed

By inputting a JOG command and then a FORWARD (REVERSE)

RUN command, operation is enabled at the jog frequency set in n032.

When multi-step speed references 1, 2, 3 or 4 are input simultaneously

with the JOG command, the JOG command has priority.

Constant No. Name Setting

n032 Jog Frequency Factory setting: 6.00 Hz

n050 to n056 Jog References Set to 10 for any constant.

Frequency

reference

FWD (REV) RUN/STOP

Multi-step speed ref. 1

(terminal S5)

Multi-step speed ref. 2

(terminal S6)

Multi-step speed ref. 3

(terminal S7)

Time

(n024) 25.0 Hz

(n025) 30.0 Hz

(n026) 35.0 Hz

(n027) 40.0 Hz

(n028) 45.0 Hz

(n029) 50.0 Hz

(n030) 55.0 Hz

(n031) 60.0 Hz