Instruction manual

6. Programming Features

Timechart for ACCELERATION/DECELERATION HOLD

Command Input

Note: If a FWD (REV) RUN command is input at the same time as an

ACCELERATION/DECELERATION HOLD command, the motor will

not operate. However, if the Frequency Reference Lower Limit (n034) is

set to a value greater than or equal to the Min. Output Frequency (n016),

the motor will operate at the Frequency Reference Lower Limit (n034).

 Using Frequency Meter or Ammeter (n066)

Selects to output either output frequency or output current to analog out-

put terminals AM-AC for monitoring.

Setting Description

0 Output frequency

1 Output current

2 Main circuit DC voltage

3 Torque monitor

4 Output power

5 Output voltage reference

6 Frequency reference monitor

FWD (REV)

RUN Command

ACCELERATION/

DECELERATION

HOLD Command

Frequency

Reference

Output

Frequency

FREQUENCY

AGREE

Signal