User`s manual

114

Inverter Status 1 (Register 002C Hex)

Output Terminal Status (Register 002D Hex)

Communications Error (Register 003D Hex)

Bit No. Function

0 During RUN (1: During RUN)

1 Zero speed (1: Zero speed)

2 Frequency agree (1: Frequency agree)

3 Warning (Nonfatal error) (1: Warning)

4 Frequency detection 1 (1: Output frequency ≤n58)

5 Frequency detection 2 (1: Output frequency ≥n58)

6 Inverter ready (1: Ready)

7 UV (1: UV)

8 Base block (1: Base block)

9 Frequency reference mode (1: Other than communications)

10 RUN command mode (1: Other than communications)

11 Overtorque detection (1: Overtorque detection)

12 Not used.

13 Fault retry (1: Fault retry)

14 Fault (1: Fault)

15 Communications time-over: No normal communications for 2 s or more

(1: Communications time-over detecting)

Bit No. Function

0 Multi-function contact output terminal MA (1: ON)

1 to 15 Not used.

Bit No. Function

0 CRC error (1: Error)

1 Data length error (1: Error)

2 Not used.

3 Parity error (1: Error)

4 Overrun error (1: Error)

5 Framing error (1: Error)

6 Communications time-over (1: Error)

7 to 15 Not used.