User`s manual

157
List of Parameters Chapter 10
Note 1. Values will be set in 0.1-Hz increments if the frequency is less than 100 Hz
and 1-Hz increments if the frequency is 100 Hz or over. With RS-422/485
communications, the unit is always 0.1 Hz.
2. With 400-V Inverters, the values for the upper limit of setting ranges and
the default settings will be twice those given in the above table.
3. The n68, n74, n76, and n77 parameters cannot be written via RS422/485
communications. They are read-only.
n78
(014E)
Error log Used to display the latest error recorded.
Note „:___“ will be displayed if no error has
been recorded.
Note This parameter is monitored only.
--- --- --- --- 6-21
n79
(014F)
Software
number
Used to display the software number of the
Inverter for OMRON’s control reference use.
Note This parameter is monitored only.
--- --- --- --- ---
Para-
meter No.
(Register
No. (Hex))
Name Description Setting
range
Unit of
setting
Default
setting
Changes
during
operation
Refer-
ence
page
Display