User manual
DESIGN
Note:
Note: Note:
Note: PRESS means a short press on a key while HOLD means
PRESS means a short press on a key while HOLD means PRESS means a short press on a key while HOLD means
PRESS means a short press on a key while HOLD means
to keep the key pressed for more than 3 seconds.
to keep the key pressed for more than 3 seconds.to keep the key pressed for more than 3 seconds.
to keep the key pressed for more than 3 seconds.
Source selector:
Source selector: Source selector:
Source selector: Press SOURCE key to cycle between the 5 inputs
of your WA202 (CDVIDEOAUXIPODTUNERCD...).
Volume control keys:
Volume control keys: Volume control keys:
Volume control keys: Press VOLUME key to change the volume:
Press - to decrease the output level and press + to increase it.
VIEW
VIEWVIEW
VIEW:
Hold (3 seconds) to switch ON/OFF the display (dimmer).
Press, when TUNER is the active source to change the RDS
display information. Your WA202 can display several informa-
tion including broadcasting station name, clock or text mes-
sages. RDS will only work if current broadcasting station have
RDS transmission and the signal is strong enough. Display
information varies according to broadcasting stations.
UP & DOWN ARROWS
UP & DOWN ARROWSUP & DOWN ARROWS
UP & DOWN ARROWS: When TUNER is the active source, press the
UP or DOWN arrows to manually tune the frequency.
LEFT & RIGHT ARROWS:
LEFT & RIGHT ARROWS: LEFT & RIGHT ARROWS:
LEFT & RIGHT ARROWS: When TUNER is the active source, press
the LEFT or RIGHT arrows to skip to previous or next memory slot.
MENU:
MENU: MENU:
MENU: When TUNER is the active source, press to toggle between
FM and AM frequency band.