User manual

Note: The headset should be purchased separately.

Startup

3. Connect the network and power, as shown below :

You have two options for network and power connections. Your system administrator will advise you which one to use.

2. Connect the handset and optional headset, as shown below:

Note: The IP phone should be used with Yealink original power adapter (5V/600mA) only. The use of the

third-party power adapter may cause the damage to the phone. If you are connecting a PC to your phone,

we recommend that you use the Ethernet cable provided by Yealink.

If inline power (PoE) is provided, you do not need to connect the power adapter. Make sure the hub/switch

is PoE-compliant. PoE is only applicable to the SIP-T21P E2 IP phone.

After the IP phone is connected to the network and

supplied with power, it automatically begins the

initialization process. After startup, the phone is ready

for use. You can configure the phone via phone user

interface or web user interfafce.

Welcome

Initializing... please wait

AC Power Option

PC Connection

(Optional)

Power Adapter

(DC 5V)

PoE ( Power over

Ethernet ) Option

PC Connection

(Optional)

IEEE 802.3af compliant

PoE Hub/Switch