User Manual

Yealink Skype for Business HD IP Phones Administrator Guide
x
For example, if you want to configure the dial-now rule, you need to locate the
dialplan.dialnow.rule.X in the Common.cfg file and then configure it as required (e.g.,
dialplan.dialnow.rule.1 = 123).
If you want to enable the audio codec 1 for account 1, you can locate the
account.1.codec.Y.enable in the MAC.cfg file and configure it as required (e.g.,
account.1.codec.1.enable = 1).
The following shows a segment of MAC.cfg file:
Method 2: Web User Interface
As described in the chapter Summary Table Format, you can directly navigate to the specified
webpage to configure the feature. You can also first log into the web user interface, and then
locate the feature field according to the web path (e.g., Account->Basic->Auto Answer) to
configure it as required.
As shown in the following illustration:
To successfully log into the web user interface, you may need to enter the user name (default:
admin) and password (default: admin). For more information, refer to Web User Interface on