User Manual

Yealink Skype for Business HD IP Phones Administrator Guide
92
 Call forward settings cannot be changed.
When the WAN connection between the branch site and central site becomes available, the
phone comes out of resiliency mode automatically. Notification of resiliency is automatically
dismissed, and you can use phone features as normal.
Note
Setting Up Your Phones with a Provisioning Server
This chapter provides basic instructions for setting up your phones with a provisioning server.
This chapter consists of the following sections:
 Provisioning Points to Consider
 Provisioning Methods
 Configuration Files and Resource Files
 Setting Up a Provisioning Server
Provisioning Points to Consider
 If you are provisioning a mass of phones, we recommend you to use central provisioning
method as your primary configuration method. For more information on central
provisioning, refer to Central Provisioning on page 93.
 A provisioning server maximizes the flexibility you have when installing, configuring,
upgrading, and managing the phones, and enables you to store configuration, and contact
files on the server. You can set up a provisioning server on the local area network (LAN) or
anywhere on the Internet. For more information, refer to Setting Up a Provisioning Server
on page 97.
 If the phone cannot obtain the address of a provisioning server during startup, and has not
been configured with settings from any other source, the phone will use configurations
stored in the flash memory. If the phone that cannot obtain the address of a provisioning
server has previously been configured with settings it will use those previous settings.
Provisioning Methods
Phones can be configured automatically through configuration files stored on a central
provisioning server, manually via web user interface or phone user interface, or by a
combination of the automatic and manual methods. If a central provisioning server is not
available, you can configure most features using manual method.
For more information on branch office resiliency, contact your system administrator.