User Manual

Setting Up Your System
101
Upgrading Firmware via Web User Interface
To manually upgrade firmware via web user interface, you need to store firmware to your local
system in advance.
To upgrade firmware manually via web user interface:
1. Click on Settings->Upgrade.
2. Click Browse to locate the required firmware from your local system.
3. Click Upgrade.
A dialog box pops up to prompt “Firmware of the Skype for Business phone will be updated.
It will take 5 minutes to complete. Please don't power off!”.
4. Click OK to confirm the upgrade.
Note
Upgrading Firmware from the Provisioning Server
Phones support using FTP, TFTP, HTTP and HTTPS protocols to download configuration files and
firmware from the provisioning server, and then upgrade firmware automatically.
Phones can download firmware stored on the provisioning server in one of two ways:
 Check for configuration files and then download firmware during startup.
 Automatically check for configuration files and then download firmware at a fixed interval
or specific time.
Method of checking for configuration files is configurable.
Procedure
Configuration changes can be performed using the configuration files or locally.
Configuration
<y0000000000xx>.cfg
Configure the way for the Skype for
Business phone to check for configuration
Do not close and refresh the browser when the Skype for Business phone is upgrading firmware
via web user interface.