User Manual

Yealink Skype for Business HD IP Phones Administrator Guide
138
To configure the backlight via phone user interface:
1. Press Menu->Basic->Display->Backlight.
2. Press or , or the Switch soft key to select the desired level from the Backlight
Active Level field.
3. Press or , or the Switch soft key to select the desired value from the Inactive
Level field.
4. Press the Save soft key to accept the change.
Bluetooth
Bluetooth enables low-bandwidth wireless connections within a range of 10 meters (32 feet).
The best performance is in the 1 to 2 meters (3 to 6 feet) range. You can activate/deactivate the
Bluetooth mode and then pair and connect the Bluetooth headset with your phone. For more
information, refer to the Yealink phone-specific user guide . It is only applicable to T48G/T46G
Skype for Business phones.
You can personalize the Bluetooth device name for the Skype for Business phone. The
pre-configured Bluetooth device name will display in scanning list of other devices. It is helpful
for the other Bluetooth devices to identify and pair with your Skype for Business phone.
Note
Procedure
Bluetooth mode can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure Bluetooth mode.
Parameter:
features.bluetooth_enable
Configure the Bluetooth device name.
Parameter:
features.bluetooth_adapter_name
Local
Web User Interface
Configure Bluetooth mode.
Navigate to:
For T48G/T46G Skype for Business
phones:
http://<phoneIPAddress>/servlet?p=f
eatures-bluetooth&q=load
Phone User Interface
Configure Bluetooth mode.
To use this feature onT48G/T46G Skype for Business phones, make sure the Bluetooth USB
dongle is properly connected to the USB port on the back of the phone.