User Manual

Yealink Skype for Business HD IP Phones Administrator Guide
146
4. Select the desired location from the pull-down list of Location.
5. Enter the domain name or IP address in the Primary Server and Secondary Server field
respectively.
6. Enter the desired time interval in the Synchronism (15~86400s) field.
7. Click Confirm to accept the change.
To configure the SNTP settings via phone user interface:
1. Press Menu->Basic->Date & Time->General->SNTP Settings.
2. Press or , or the Switch soft key to select the time zone that applies to your area
from the Time Zone field.
The default time zone is "GMT+8".
3. Enter the domain name or IP address of SNTP server in the NTP Server1 and NTP Server2
field respectively.
4. Press or , or the Switch soft key to select automatic, enabled and disabled from the
Daylight Saving field.
5. Press or , or the Switch soft key to select the desired location from the Location
field.
6. Press the Save soft key to accept the change.
Time and Date Settings
You can set the time and date manually when phones cannot obtain the time and date
from the NTP time server. The time and date display can use one of several different
formats.