User Manual

Yealink Skype for Business HD IP Phones Administrator Guide
226
Parameter
Permitted Values
Default
Description:
Enables or disables the phone to play a distinct ringtone for team-call.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), incoming calls to team-call group will use the phone's ring tone.
The phone's ring tone is configured by the parameter "phone_setting.ring_type".
If it is set to 1 (Enabled), you can set a distinct ringtones for team-call.
Web User Interface:
None
Phone User Interface:
None
phone_setting.team_call_ring_type
Refer to the following
content
Ring1.wav
Description:
Configures a ring tone for the team-call.
Permitted Values:
Ring1.wav, Ring2.wav, Ring3.wav, Ring4.wav, Ring5.wav, Ring6.wav, Ring7.wav, Ring8.wav,
Silent.wav, Splash.wav or custom ring tone name (e.g., Customring.wav).
Example:
To configure a phone built-in ring tone (e.g., Ring1.wav):
phone_setting.team_call_ring_type = Ring1.wav
To configure a custom ring tone (e.g., Customring.wav):
phone_setting.team_call_ring_type = Customring.wav
Web User Interface:
None
Phone User Interface:
Menu->Basic->Sounds->Ring Tones->Team-call
To set a ringtone for the team-call via phone user interface:
1. Press Menu->Basic->Sounds->Ring Tones->Team-call.
2. Press or to select a ring tone.
3. Press the Save soft key to accept the change.