User Manual

Yealink Skype for Business HD IP Phones Administrator Guide
228
Response Group Ringtone
Response group ring tone feature allows the phone to play a distinct ringtone when receiving a
response group call.
Procedure
Response group ring tone can be configured using the configuration files or locally.
Configuration
File
<y0000000000xx>.cfg
Configure a ring tone for the response
group calls.
Parameter:
phone_setting.rsg_call_ring.enable
phone_setting.rsg_call_ring_type
Local
Phone User Interface
Configure a ring tone for the response
group calls.
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
phone_setting.rsg_call_ring.enable
0 or 1
1
Description:
Enables or disables the phone play a distinct ringtone for response group calls.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), incoming calls to response group will use the phone's ring tone.
The phone's ring tone is configured by the parameter "phone_setting.ring_type".
If it is set to 1 (Enabled), you can set a distinct ringtones for response group calls.
Web User Interface:
None
Phone User Interface:
None
phone_setting.rsg_call_ring_type
Refer to the following
content
Ring1.wav
Description:
Configures a ring tone for response group calls.
Permitted Values:
Ring1.wav, Ring2.wav, Ring3.wav, Ring4.wav, Ring5.wav, Ring6.wav, Ring7.wav, Ring8.wav,