User Manual

Configuring Basic Features
229
Parameter
Permitted Values
Default
Silent.wav, Splash.wav or custom ring tone name (e.g., Customring.wav).
Example:
To configure a phone built-in ring tone (e.g., Ring6.wav):
phone_setting.rsg_call_ring_type = Ring6.wav
To configure a custom ring tone (e.g., Customring.wav):
phone_setting.rsg_call_ring_type = Customring.wav
Web User Interface:
None
Phone User Interface:
Menu->Basic->Sounds->Ring Tones->Response Group
To set a ringtone for the response group via phone user interface:
1. Press Menu->Basic->Sounds->Ring Tones->Response Group.
2. Press or to select a ring tone.
3. Press the Save soft key to accept the change.
Allow Trans Exist Call
Allow trans exist call feature allows users to select transfer-to party’s call during multiple calls. It
is convenient to transfer the active call to another existing call. It is not applicable to T48G/T46G
Skype for Business phones.
For example, party A (2216) has two calls on line 1, one with party B (2227) and the other with
party C (2529). If party A transfers the call with party B by pressing the Tran soft key, a “Transfer
to” screen will display on the phone. In this case, party A can select to transfer the call to a new
party or party C (2529).
Procedure
Allow trans exist call can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure allow trans exist call.
Parameters:
transfer.multi_call_trans_enable
Local
Web User Interface
Configure allow trans exist call.