User Manual

Yealink Skype for Business HD IP Phones Administrator Guide
230
Navigate to:
http://<phoneIPAddress>/servlet?p=fea
tures-general&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
transfer.multi_call_trans_enable
0 or 1
1
Description:
Enables or disables the Skype for Business phone to select transfer-to party's call (a new call
or another existing call) during multiple calls when user presses the Tran soft key.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the user can select to transfer the active call to a new call or another
existing call during multiple calls when the user presses the Tran soft key.
If it is set to 0 (Disabled), the user can transfer the active call to a new call during multiple
calls when the user presses the Tran soft key.
Note: It is not applicable to T48G/T46G Skype for Business phones.
Web User Interface:
Features->General Information->Allow Trans Exist Call
Phone User Interface:
None
To configure allow trans exist call via web user interface (take T42G Skype for Business
phones for example):
1. Click on Features->General Information.