User Manual

Yealink Skype for Business HD IP Phones Administrator Guide
252
Parameters
Permitted Values
Default
Description:
Enables or disables the user to sign into the phone via PC.
0-Disabled
1-Enabled
Note: It works only if the value of the parameter “sip.btoe.enable” is set to 1 (Enabled).
If it is set to 1 (Enabled), make sure your phone has paired with the Skype for Business client
using BToE software, so that you can sign into the phone via PC.
Web User Interface:
None
Phone User Interface:
None
sip.btoe.pairing_mode
0 or 1
0
Description:
Configures the BToE pairing mode.
If it is set to 0 (Auto), you can pair your phone and PC without a pairing code.
If it is set to 1 (Manual), your phone will generate a pairing code when pairing with Skype for
Business client. You need to enter the pairing code on your BToE software to manually to
pair your phone and Skype for Business client.
Note: It works only if the value of the parameter “sip.btoe.enable” is set to 1 (Enabled).
Web User Interface:
Settings->BToE->BToE paring Mode
Phone User Interface:
Menu->Features->BToE->BToE Pairing Mode
To configure BToE feature via web user interface:
1. Click on Settings->BToE.
2. Select the desired value from the pull-down list of BToE.