User Manual

Configuring Advanced Features
269
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
features.action_uri.enable
0 or 1
0
Description:
Enables or disables the Skype for Business phone to receive the action URI requests.
0-Disabled
1-Enabled
Web User Interface:
None
Phone User Interface:
None
features.action_uri_limit_ip
IP address or any
Blank
Description:
Configures the IP address of the server from which the Skype for Business phone receives
the action URI requests.
For discontinuous IP addresses, multiple IP addresses are separated by commas.
For continuous IP addresses, the format likes *.*.*.* and the “*” stands for the values 0~255.
For example: 10.10.*.* stands for the IP addresses that range from 10.10.0.0 to
10.10.255.255.
If left blank, the Skype for Business phone will reject any HTTP GET request.
If it is set to “any”, the Skype for Business phone will accept and handle HTTP GET requests
from any IP address.
Example:
features.action_uri_limit_ip = any
Note: It works only if the value of the parameter “features.action_uri.enable” is set to 1
(Enabled).
Web User Interface:
Features->Remote Control->Action URI allow IP List
Phone User Interface:
None
To configure the trusted IP address(es) for action URI via web user interface:
1. Click on Features->Remote Control.
2. Enter the IP address or any in the Action URI allow IP List field.