User Manual

Yealink Skype for Business HD IP Phones Administrator Guide
270
Multiple IP addresses are separated by commas. If you enter “any” in this field, the Skype
for Business phone can receive and handle GET requests from any IP address. If you leave
the field blank, the Skype for Business phone cannot receive or handle any HTTP GET
request.
3. Click Confirm to accept the change.
Capturing the Current Screen of the Phone
You can capture the screen display of the Skype for Business phone using the action URI. Skype
for Business phones support handling an HTTP or HTTPS GET request. The URI format is
http(s)://<phoneIPAddress>/screencapture. The captured picture can be saved as a BMP or
JPEG file.
You can also use the URI “http(s)://<phoneIPAddress>/screencapture/download” to capture the
screen display first, and then download the image (which is saved as a JPG file and named with
the Skype for Business phone model and the capture time) to the local system. Before capturing
the Skype for Business phone’s current screen, ensure that the IP address of the PC is included in
the trusted IP address for Action URI on the Skype for Business phone.
When you capture the screen display, the Skype for Business phone may prompt you to enter
the user name and password of the administrator if web browser does not remember the user
name and password for web user interface login.
Note
To capture the current screen of the Skype for Business phone:
1. Enter request URI (e.g., http://10.2.20.126/screencapture) in the browser's address bar and
press the Enter key on the keyboard.
2. Do one of the following:
- If it is the first time you capture the phone’s current screen using the computer, the
browser will display “Remote control forbidden”, and the LCD screen will prompt the
message “Allow remote control?”.
Press the OK soft key on the Skype for Business phone to allow remote control. The
phone will return to the previous screen. Refresh the web page.
Skype for Business phones also support capturing the screen display using the old URI
“http://<phoneIPAddress>/servlet?command=screenshot”.