User Manual

Configuring Audio Features
285
Parameter
Permitted Values
Default
phone_setting.private_line_ring.enable
0 or 1
1
Description:
Enables or disables the IP phone to set a distinct ring tone for the private line.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), private call will use the phone’s ring tone. The phone's ring tone is
configured by the parameter "phone_setting.ring_type".
If it is set to 1 (Enabled), a distinct ring tone can be assigned to the private line.
Web User Interface:
None
Phone User Interface:
None
phone_setting.private_line_ring_type
Refer to the following
content
Ring6.wav
Description:
Configures a ring tone for the private line.
Permitted Values:
Ring1.wav, Ring2.wav, Ring3.wav, Ring4.wav, Ring5.wav, Ring6.wav, Ring7.wav, Ring8.wav,
Silent.wav, Splash.wav or custom ring tone name (e.g., Customring.wav).
Example:
To configure a phone built-in ring tone (e.g., Ring6.wav):
phone_setting.private_line_ring_type = Ring6.wav
To configure a custom ring tone (e.g., Customring.wav):
phone_setting.private_line_ring_type = Customring.wav
Web User Interface:
Settings->Preference->Private line ring
Phone User Interface:
Menu->Basic->Sounds->Ring Tones->Private Line Tones
To change the ring tone for the private line via web user interface:
1. Click on Settings->Preference.