User Manual

Yealink Skype for Business HD IP Phones Administrator Guide
328
Parameter
Permitted Values
Default
static.security.user_password = admin:456 means setting the password of administrator
(current user name is “admin”) to password 456.
Note: Phones support ASCII characters 32-126(0x20-0x7E) in passwords. You can set the
password to be empty via web user interface only.
Web User Interface:
Security->Password
Phone User Interface:
Menu->Advanced (default password: admin)->Set Password
Note: You cannot change the user password via phone user interface.
To change the user or administrator password via web user interface:
1. Click on Security->Password.
2. Select the desired value (user or admin) from the pull-down list of User Type.
3. Enter new password in the New Password and Confirm Password fields.
Valid characters are ASCII characters 32-126(0x20-0x7E) except 58(3A).
4. Click Confirm to accept the change.
Note
To change the administrator password via phone user interface:
1. Press Menu-> Advanced (default password: admin) ->Set Password.
2. Enter the current administrator password in the Current PWD field.
3. Enter new password in the New PWD field and Confirm PWD field.
Valid characters are ASCII characters 32-126(0x20-0x7E).
4. Press the Save soft key to accept the change.
If logging into the web user interface of the phone with the user credential, you need to enter the
old user password in the Old Password field.