User Manual

Troubleshooting
357
Configuring the Severity Level of the Log
Procedure
Severity level can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configures the detail level of global log
to be exported.
Parameters:
syslog.log_level
Local
Web User Interface
Configure the severity level of the logs
to be reported.
Navigate to:
http://<phoneIPAddress>/servlet?m=m
od_data&p=settings-config&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
syslog.log_level
Integer from 0 to 6
3
Description:
Configures the detail level of global log to be exported.
0-system is unusable
1-action must be taken immediately
2-critical condition
3-error conditions
4-warning conditions
5-normal but significant condition
6-informational
Note: If you change this parameter, the Skype for Business phone will reboot to make the
change take effect.
Web User Interface:
Settings->Configuration->Global log Level
Phone User Interface:
None
To configure the severity level of the log via web user interface:
1. Click on Settings->Configuration.
2. Select the desired level from the pull-down list of corresponding log levels.