User Manual

Yealink Skype for Business HD IP Phones Administrator Guide
24
<MAC>.cfg
Configure static DNS address.
Parameters:
network.primary_dns
network.secondary_dns
Local
Web User Interface
Configure the static DNS feature.
Configure static DNS address.
Navigate to:
http://<phoneIPAddress>/servlet?p
=network&q=load
Phone User Interface
Configure the static DNS feature.
Configure static DNS address.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
network.static_dns_enable
0 or1
0
Description:
Triggers the static DNS feature to on or off.
0-Off
1-On
If it is set to 0 (Off), the Skype for Business phone will use the IPv4 DNS obtained from DHCP.
If it is set to 1 (On), the Skype for Business phone will use manually configured static IPv4
DNS.
Note: It works only if the value of the parameter “network.internet_port.type” is set to 0
(DHCP). If you change this parameter, the Skype for Business phone will reboot to make the
change take effect.
Web User Interface:
Network->Basic->IPv4 Config->Static DNS
Phone User Interface:
Menu->Advanced (default password: admin)->Network->WAN Port->IPv4->DHCP->Static
DNS
network.primary_dns
IPv4 Address
Blank
Description:
Configures the primary IPv4 DNS server.