User Manual

Yealink Skype for Business HD IP Phones Administrator Guide
38
Parameters
Permitted Values
Default
Description:
Configures the Internet (WAN) port type for IPv4.
0-DHCP
1-PPPoE (not applicable to T42G/T41P/T40P Skype for Business phones)
2-Static IP Address
Note: It works only if the value of the parameter “network.ip_address_mode” is set to 0
(IPv4) or 2 (IPv4 & IPv6). If you change this parameter, the Skype for Business phone will
reboot to make the change take effect.
Web User Interface:
Network->Basic->IPv4 Config
Phone User Interface:
Menu->Advanced (default password: admin)->Network->WAN Port->IPv4
network.ip_address_mode
0, 1 or 2
0
Description:
Configures the IP address mode.
0-IPv4
1-IPv6
2-IPv4 & IPv6
Note: If you change this parameter, the Skype for Business phone will reboot to make the
change take effect.
Web User Interface:
Network->Basic->Internet Port->Mode(IPv4/IPv6)
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->WAN Port->IP Mode
network.internet_port.ip
IPv4 Address
Blank
Description:
Configures the IPv4 address.
Example:
network.internet_port.ip = 192.168.1.20
Note: It works only if the value of the parameter “network.ip_address_mode” is set to 0
(IPv4) or 2 (IPv4 & IPv6), and "network.internet_port.type" is set to 2 (Static IP Address). If
you change this parameter, the Skype for Business phone will reboot to make the change
take effect.
Web User Interface: