User Manual

Yealink Skype for Business HD IP Phones Administrator Guide
42
The Skype for Business phone reboots automatically to make settings effective after a
period of time.
To configure a static IPv4 address via phone user interface:
1. Press Menu->Advanced (default password: admin) ->Network->WAN Port->IPv4.
2. Press or , or the Switch soft key to select the Static IP from the Type field.
3. Enter the desired value in the IP Address, Subnet Mask, Gateway, Primary DNS and
Secondary DNS field respectively.
4. Press the Save soft key to accept the change.
The Skype for Business phone reboots automatically to make settings effective after a
period of time.
PPPoE
PPPoE (Point-to-Point Protocol over Ethernet) is a network protocol used by Internet Service
Providers (ISPs) to provide Digital Subscriber Line (DSL) high speed Internet services. PPPoE
allows an office or building-full of users to share a common DSL connection to the Internet.
PPPoE connection is supported by the Skype for Business phone Internet port. Contact your ISP
for the PPPoE user name and password. PPPoE is not applicable to T42G/T41P/T40P Skype for
Business phones.
Procedure
PPPoE can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure PPPoE on the Skype for
Business phone.
Parameters:
network.internet_port.type
<y0000000000xx>.cfg
Configure the user name and
password for PPPoE on the Skype
for Business phone.
Parameters:
network.pppoe.user
network.pppoe.password
Local
Web User Interface
Configure PPPoE on the Skype for
Business phone.
Configure the user name and
password for PPPoE on the Skype
for Business phone.
Navigate to:
http://<phoneIPAddress>/servlet?p