User Manual

Yealink Skype for Business HD IP Phones Administrator Guide
44
Parameters
Permitted Values
Default
Menu->Advanced (default password: admin) ->Network->WAN
Port->IPv4->PPPoE->PPPoE User
network.pppoe.password
String within 99
characters
Blank
Description:
Configures the password for PPPoE connection.
Example:
network.pppoe.password = yealink123
Note: It works only if the value of the parameter “network.ip_address_mode” is set to 0
(IPv4) or 2 (IPv4 & IPv6), and "network.internet_port.type" is set to 1 (PPPoE). If you change
this parameter, the Skype for Business phone will reboot to make the change take effect. It is
not applicable to T42G/T41P/T40P Skype for Business phones.
Web User Interface:
Network->Basic->IPv4 Config->PPPoE->Password
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->WAN
Port->IPv4->PPPoE->PPPoE Password
To configure PPPoE via web user interface:
1. Click on Network->Basic.
2. In the IPv4 Config block, mark the PPPoE radio box.
3. Enter the user name and password in corresponding fields.