User Manual

Setting Up Your System
47
network.pc_port.speed_duplex
Local
Web User Interface
Configure the transmission methods of
the Internet (WAN) port.
Navigate to:
http://<phoneIPAddress>/servlet?p=net
work-adv&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
network.internet_port.speed_duplex
0, 1, 2, 3, 4 or 5
0
Description:
Configures the transmission method of the Internet (WAN) port.
0-Auto Negotiate
1-Full Duplex 10Mbps
2-Full Duplex 100Mbps
3-Half Duplex 10Mbps
4-Half Duplex 100Mbps
5-Full Duplex 1000Mbps (only applicable to T48G/T46G/T42G Skype for Business phones)
Web User Interface:
Network->Advanced->Port Link->WAN Port Link
Phone User Interface:
None
network.pc_port.speed_duplex
0, 1, 2, 3 ,4 or 5
0
Description:
Configures the transmission method of the PC (LAN) port.
0-Auto Negotiate
1-Full Duplex 10Mbps
2-Full Duplex 100Mbps
3-Half Duplex 10Mbps
4-Half Duplex 100Mbps
5-Full Duplex 1000Mbps (only applicable to T48G/T46G/T42G Skype for Business phones)
Note: It works only if the value of the parameter “network.pc_port.enable” is set to 1 (Auto
Negotiate). For T48G/T46G/T42G Skype for Business phones, you can set the transmission
speed to 1000Mbps/Auto Negotiate to transmit in 1000Mbps. Make sure the Skype for
Business phone is connected to a switch that supports Gigabit Ethernet. We recommend