User Manual

Setting Up Your System
59
3. Enter the desired time interval in the Packet Interval (1~3600s) field.
4. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
5. Click OK to reboot the Skype for Business phone.
To configure LLDP feature via phone user interface:
1. Press Menu->Advanced (default password: admin) ->Network->LLDP->LLDP Status.
2. Press or , or the Switch soft key to select the desired value from the LLDP Status
field.
3. Enter the priority value (1-3600s) in the Packet Interval field.
4. Press the Save soft key to accept the change.
The Skype for Business phone reboots automatically to make settings effective after a
period of time.
CDP (Cisco Discovery Protocol) allows Skype for Business phones to receive and/or transmit
device-related information from/to directly connected devices on the network that are also
using the protocol, and store the information about other devices.
When CDP feature is enabled on Skype for Business phones, the Skype for Business phones
periodically advertise their own information to the directly connected CDP-enabled switch. The
Skype for Business phones can also receive CDP packets from the connected switch. When the
VLAN configurations on the Skype for Business phones are different from the ones sent by the