User Manual

Setting Up Your System
75
Parameters
Permitted Values
Default
Web User Interface:
Network->Advanced->ICMPv6 Status->Active
Phone User Interface:
None
To configure IPv6 address assignment method via web user interface:
1. Click on Network->Basic.
2. Select the desired address mode (IPv6 or IPv4 & IPv6) from the pull-down list of
Mode(IPv4/IPv6).
3. In the IPv6 Config block, mark the DHCP or the Static IP Address radio box.
- If you mark the Static IP Address radio box, configure the IPv6 address and other
configuration parameters in the corresponding fields.