Instructions / Assembly

Grill Table Kit

Get more project plans at BuildYella.com 1

OVERVIEW PACKAGE INCLUDES

TOOLS NEEDED

NOTES

Place the Table Top Assembly face down on a

at surface.

Position the Table Shelf Assembly at the

appropriate height for your grill (see Note 2).

1. Each leg will match with a pre-drilled hole. You may have

to rotate the legs and try them in different locations to get

the pre-drilled holes to align.

2. There are 3 locations for shelf height. Chose the one that

best ts your grill. A 22.5” diameter grill is the largest grill

that will t in this table.

3. A paving stone may be required to be placed under the

grill. Check manufacturer’s instructions for your specic grill.

4. Stain, seal or paint your grill table immediately for the best

protection from the elements.

5. These instructions are for the grill table only. Grill sold

separately.

Place four legs in corners as needed for pre-

drilled hole to align (see Note 1). Using socket

wrench or an adjustible wrench, secure in place

with bolts, washers and nuts.

Secure with bolts, washers, and nuts. Tighten

nuts with a socket wrench or an adjustable

wrench.

Socket Wrench OR an Adjustable Wrench

1x Table Top Assembly

1x Table Shelf Assembly

4x Legs

8x Carriage Bolts

8x Washers

8x Nuts

ASSEMBLY INSTRUCTIONS

PAGE 1
Grill Table Kit ASSEMBLY INSTRUCTIONS OVERVIEW PACKAGE INCLUDES 1 Place the Table Top Assembly face down on a flat surface. 1x 1x 4x Table Top Assembly Table Shelf Assembly Legs 8x 8x 8x Carriage Bolts Washers Nuts 2 Place four legs in corners as needed for predrilled hole to align (see Note 1). Using socket wrench or an adjustible wrench, secure in place with bolts, washers and nuts.
PAGE 2
Grill Table Kit IMPORTANT INFORMATION • • • • • • • • • • • • • • • Consult the end tag to determine which preservative or preservative system was used in the treatment of that particular product. YellaWood® brand products may be used in direct contact with aluminum building products when limited to code-compliant construction applications that provide proper water drainage and do not allow the wood to be exposed to standing water or water immersion.