Flaring Tool Manual

Table Of Contents

Electric/Manual

Lightweight Flaring Tool

Step 1:

Use a reamer to clean the tube. Insert the tube

into the appropriate hole. Slide the tube posi-

tioning device to the hole and make sure the

tube touches the device lightly. Then slide the

yoke to the top of the tube.

Step 2:

Line up the arrow indicator on the yoke with

the indicator on the bar. Then tighten the side

handle on the yoke.

Step 3-1:

Use a power drill with torque option to start

flaring. When the cone is free spinning, it

means the flaring is in process. When the cone

stops and does not rotate any further, the flaring

is complete. Do not overturn.

Note:

Use 1/4” hex bit or reversed screwdriver bit

Step 3-2:

For manual flaring, take the side handle off the

side and use it on top of the yoke.

Note: After some uses, clean the debris off the eccentric cone to ensure the smoothness of

the cone. Also, for a longer lifespan, use lubricant at the thread to prevent rust.

Flaring Instructions

Tube

Positioning

Device

Arrow indicator

Flaring bar

Side handle

Yoke

PAGE 1
Electric/Manual Lightweight Flaring Tool Flaring Instructions Tube Positioning Device Step 1: Use a reamer to clean the tube. Insert the tube into the appropriate hole. Slide the tube positioning device to the hole and make sure the tube touches the device lightly. Then slide the yoke to the top of the tube. Yoke Arrow indicator Flaring bar Step 2: Line up the arrow indicator on the yoke with the indicator on the bar. Then tighten the side handle on the yoke.
PAGE 2
Step 3-3: Or use the top handle to flare manually. Step 4: Use a power drill or manually return the yoke to the original position. Then release the side handle to move the yoke to the back. Open the flaring bar to remove the flared tube. WARNING 1. The side nut to hold the bars in place doesn’t come in free-spinning function. DO NOT use power drill to tighten the nut of the yoke. 2. For safety reasons, use only power drills with adjustable torque to prevent injury when locked up.