Product Manual A

SYSTEM AIR PURGE PROCEDURE

IMPORTANT: BEFORE FIRST USE

Perform the following Air Purge Procedure to remove any air that may have been introduced into the hydraulic

system as a result of product shipment and handling. This step is to be completed without any weight on the

jack.

2. Turn release valve counter-clockwise on full turn

to the open position.

4. With a at blade screwdriver, unscrew the oil ll

plug slightly to purge trapped air from system. (For

RUBBER OIL PLUGS Use caution not to tear or

puncture the oil plug.)

3. Rapidly pump the handle 6-8 times. Leave handle

in down position to expose oil ll plug.

6. Turn release valve clockwise to the closed

position.

7. Jack is now ready for use. Check for proper pump

action. (Repeat steps if neccessary).

Cover plate

1. Remove cover plate.

5. Replace Cover Plate.