Instruction manual

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
*
*
HAND PULSE SENSORS
YORK BARBELL (U.K.) LTD.
CHURCHILL WAY, DAVENTRY,
NORTHANTS, NN11 4YB ENGLAND
TEL: [phone]
FAX: [phone]
E-MAIL: [e-mail]
HELP LINE
(8:30am- 4:30pm)
YORK BARBELL (AUST.) LTD.
UNIT 1, LOT 2, SWAFFHAM ROAD,
MINTO, N.S.W. 2566 AUSTRALIA
TEL: [phone]
FAX: [phone]
E-MAIL: [e-mail]
HELP LINE
(8:30am- 4:30pm)
NOTE: 1. When targets / limits have been reached an alarm will sound.
6. Battery spec: 2 AA size.
5. If the display becomes faint, replace the batteries.
4. The mode function will only work when all activity has stopped.
3. The computer is equipped with an auto start / stop devise. It will activate
when you start to pedal and switch off some time after you stop pedalling.
2. Without any signal for 5 minutes, the LCD display will shout off
automatically, with all values reserved. Press any key or start cycling
to reactivate.
Grip the hand sensors normally (NOT TOO TIGHT) during exercise and after a few seconds
the computer will display your pulse reading.
Some people will not be able to obtain an accurate hand pulse reading e.g.due to hand,
skin or variations in circulation.
If you have a problem contact our YORK HELPLINE.
To obtain a pulse reading you must have your left and right hand holding the sensors at the
same time.
LEFT
HAND
PULSE
SENSOR
RIGHT
HAND
PULSE
SENSOR