Instruction manual

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
*
*
2.
ATTACH THE FRONT POST
Rest the front post on the main frame carefully as
shown.
Connect the sensor wire plug to the middle wire socket.
Check middle wire runs up the front post and out
the top - later this will connect to the computer.
Insert the front post to the main frame in position and
secure, using four hex head bolts, spring washers and
washers as shown.
NOTE: TAKE CARE to ensure the middle wire does not
get trapped when you attach the front post to
the main frame.
Fix the plastic cap onto the bolts head.
X4
Attach the tension control to the front post and secure,
using two self tapping screws.
A
FRONT
POST
MAIN
FRAME
B
FRONT
POST
MAIN FRAME
BRACKET
C
D
X4
PLASTIC
CAP
X2
8502-20
8502-13
8502-40N
8502-54
8502-67