Specifications

a i r syst e m s
130
• Day (normal), night (economy) and unoccupied (stand by).
• Lockout code on screen gives direct diagnostics.
• ON/OFF or programmable from dip switch setting.
• Day or night programmable state avoids wide internal temperature variation.
• 3 preset and 3 programmable proles.
• Select the control sensor you want to use (integrated in the thermostat, return air in duct
or room sensor).
• Turbo, normal or economy logic from dip switch setting.
• Temperature override.
• From –3°C to +3°C sensor offset.
• Average temperature with room or duct sensors.
Features and benets Thermostat DPC-1
Copper-copper coil:
Available as an option, copper-copper coils are often used for renery/chemical sites or
salt-laden air where it is difcult to service the unit.
Common Specications
Circuit 1, Discharge temperature too high
or probe short circuit
Circuit 1, High pressure switch, outdoor fan overload
or compressor motor protection module
Meaning
Indoor sensor not calibrated
Communication alarm
Selected sensor not valid
Pin alarm
Codes
94
93
92
91
12
11
Anti-corrosion blue protected ns:
Available as option, blue coated ns (conform to 1000 hrs salt spray fog ASTM B117
standard) will extend the life of your A/C in aggressive area. An economical alternative to
copper-copper coils.
Cabinet:
Build to be use in harsh conditions, heavy gauge galvanised steel cabinet will provide years
of dependable operation. Automatic line painting process degrease, phosphate, passivate,
clean with demineralised water and powder paint backed on oven at 220°C casing panels.
An exceptionally durable nish RAL9002 guaranteed by 800 hours fog spray protection
process in accordance with DIN 50 021.
Quality and ELT:
Design, built and tested under ISO9001 quality system certication, we are constantly
listening to customer comments. For this reason, our End of Line Test ELT strives to be as
close as possible to the commissioning you carry out on site.