Owner`s manual

36
YOWZA CAPTIVA CROSSTRAINER
COMPUTER OPERATION
DISPLAY FUNCTIONS:
RESISTANCE LEVEL DISPLAY:
Displays RESISTANCE level from 25W to 400W each step 5W.
MOTION LEVEL DISPLAY:
Displays motion level from 1 to 12.
8 X 16 DOT MATRIX RESISTANCE LEVEL PROFILE DISPLAY:
Displays all operating instructions prior to the workout and displays RESISTANCE level profile during the workout.
USER DATA:
Displays and store user data from U1 to U9.
FAN:
First Press: Second Press: Third Press: Fourth Press: STOP
COMPUTER OPERATION:
ENGLISH/METRIC CONVERSION:
The elliptical computer display can show ENGLISH and METRIC information. Computer display “MPH” is ENGLISH status and
display “KM/H” is METRIC status. The factory should have the proper setting on this for different markets. In case that the elliptical
needs to be converted between METRIC and ENGLISH readout, please follow the procedure as below:
1. Set the POWER SWITCH to ON then Press both RESISTANCE UP and DOWN buttons on the computer and hold them for 3
seconds. The computer will sound one short beep and “Sr 1” blinking. Press MOTION UP button to select display “Sr 2”
blinking then press START button to enter conversion METRIC/ENGLISH function.
2. After Press the START button the computer will display either “KM/H” or “MPH” blinking then press RESISTANCE
UP/DOWM button to switch between “KM/H” and “MPH” then press ENTER/STOP button twice return to the POWER ON
status.
PAUSE/STOP:
During the workout, press STOP button or STOP pedaling for 30 seconds to enter PAUSE status. The RESISTANCE LEVEL Dot
Matrix display will show “PAUSE”. All figures on the console will be frozen. Press the START button or start pedaling to resume the
program and all the display will continue the performance until the program finishes. If you leave the pedal stopped for over 3 minutes
or press the STOP button, all the data will return to 0 and the computer will return to POWER ON status.
SLEEP MODE:
The computer will automatically enter SLEEP MODE if left idle for 3 minutes without any input in POWER ON status. When the
computer is in SLEEP MODE, press any button or pedal and the machine will return to POWER ON status. You can turn SLEEP MODE
off but the console will be drawing power indefinitely if it plugged in to keep the LCD lit.
To turn SLEEP MODE off, get the console to POWER ON status then press both RESISTANCE UP and DOWN buttons on the
computer and hold them for 3 seconds. The computer will sound one short beep and “Sr 1” blinking. Press START button to enter
conversion SLEEP MODE function. After Press the START button the computer will display either “On” or “Off” blinking then press
RESISTANCE UP/DOWM button to switch between “On” and “Off” then press ENTER/STOP button twice return to the POWER ON
status.
QUICK START:
Press the START button to start exercise,
1. Resistance starts from Level 1, press to RESISTANCE UP/DOWN to adjust the resistance.
2. Level starts from Level 1, press MOTION UP/DOWN to adjust the motion levels.