MIAMI Elliptical ※TABLE OF CONTENTS 1. PRECAUTIONS................................. P1 2. POWER REQUIRMENTS............................. P2 3. BEFORE YOU BEGIN.............................. P3 4. SUPPLIED COMPONENTS / SUPPLIED HARDWARE.............. P4~P5 5. PARTS LIST................................ P6~P10 6. ASSEMBLY INSTRUCTIONS........................ P11~P19 7. EXPLODED DIAGRAM........................... P20~P23 8. WIRE DIAGRAM........................ .......P24~25 9.
http://www.yowzafitness.com/ 1 PRECAUTIONS Open the boxes: You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are included in the boxes. Check the Parts List for a full count of the number of parts included for this product to be assembled properly. If you are missing any parts or have any assembly questions call your local dealer or contact us directly.
2 YOWZA MIAMI ELLIPTICAL POWER REQUIREMENTS IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN THE RISK OF AN ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN. This cross trainer can be seriously damaged by sudden voltage changes in your home’s electrical power.
http://www.yowzafitness.com/ 3 BEFORE YOU BEGIN Before assembling or using the exercise cycle, please read the following instructions carefully. They contain important information for use and maintenance of the equipment as well as for your personal safety. Keep these instructions in a safe place for maintenance purposes or for ordering spare parts. This product has moving parts and users must be careful not to accidentally pinch fingers or other appendages in the openings especially while in use.
4 YOWZA MIAMI ELLIPTICAL SUPPLIED COMPONENTS This list identifies the major components you will use to assemble this product. No. Description Qty.
http://www.yowzafitness.com/ 5 SUPPLIED HARDWARE This list identifies the hardware you will use to assemble the product. To help distinguish between the various types of screws and bolts, use the scale below to measure them and compare them to the sizes listed. No. Description Qty. 408 4x15mm Screw – Cone point 4 494 20x30x0.5mm Washer 2 501 4x12mm Screw – Cone Point 4 502 15x22–M8x10mm Bolt 2 503 15x26–M8x15mm Bolt 2 504 M8x20mm Allen Head CAP Bolt 4 505 20x79.
6 YOWZA MIAMI ELLIPTICAL PARTS LIST Item No. Description Qty. Part No.
http://www.yowzafitness.com/ PARTS LIST Item No. Description Qty. Part No. 237 Crank Pivot Bushing 1 MIAMI-237 238 Console Overlay 1 MIAMI-238 244 OD25XL75X4.
8 YOWZA MIAMI ELLIPTICAL PARTS LIST Item No. 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 445 446 447 448 449 451 452 453 454 455 456 457 459 460 461 463 Description 3x16mm Screw – Flat Point M8x20mm Screw 4x12mm Screw – Cone Point M32 C Clip 12x20x2mm PU Washer M6x12mm Allen Head Bolt M8x20mm Allen Head Bolt M5 Nut M8 Nylon Nut M25 C Clip M3 Nut Pivot M10 x 56.6mm M12 C Clip M10x45mm Bolt 4.
http://www.yowzafitness.com/ PARTS LIST tem No. Description 464 467 468 469 472 473 476 477 478 479 480 482 483 484 485 M5/12x32mm Allen Head Bolt M5x15mm Screw M5 Nut 5mm Lock Washer 4x15mm Screw – Flat Point 2x10mm Screw – Flat Point M5 Nylon Nut 5x10x1mm Washer 10x20x5mm Washer 10x23x2mm Washer 12X20X0.5mm Plastic Washer M6x20mm Screw 6x13x1.5mm Washer 8x18x2mm Washer 10x30x1mm Plastic Washer 486 487 488 489 490 493 494 497 498 499 5/16" Nylon Nut U - Iron Screw Hole Plate – 5x11x16.
10 YOWZA MIAMI ELLIPTICAL PARTS LIST Item No. Description Qty. Part No.
http://www.yowzafitness.com/ ASSEMBLY CUT CUT CUT 4 3 5 2 6 1 (A) Remove your Elliptical from the carton and place it on the floor in an open area. (B) Remove the Elliptical and all the components and hardware from the box. (C) Check the quantities of all components and hardware with the component and hardware lists on pages 4-5. (D) Carefully separate all parts by size and type. This is critical as many are of similar size and shape. Use supplied ruler to size.
12 YOWZA MIAMI ELLIPTICAL STEP1 ASSEMBLY Step 1 342 408 341 408 341 408 109 342 STEP1-A) Attach the Incline Frame Lower Cover (341, 342) to the incline frame. STEP1-B) Carefully snap pieces together using plastic guides. STEP1-C) Secure using cone point screw (408).
http://www.yowzafitness.com/ STEP2 ASSEMBLY Step 2-A 704 705 Step 2 112 Step 2-B 109 C 708 511 517 D 507 508 Step 2-CD 511 F 517 708 511 109 STEP2-A). Remove the Undercarriage Cover (704, 705) by carefully lifting pedal Assembly and removing each piece one at a time. Be careful not to snap Plastic push pins when taking apart. Verify that rear incline frame holder (206) is securely tightened to Main Frame (112). STEP2-B).
14 YOWZA MIAMI ELLIPTICAL STEP3 ASSEMBLY Step 3-A 504 Step 3 504 601 112 602 Step 3-B 704 509 509 510 506 Step 3-C 520 703 STEP3-A). Assemble the Console Support Tube (101) to the Main Frame and secure Using four M8x20 mm Allen Head CAP Bolts (504). Connect the 8Pin Power Wire – Upper (601) to 8Pin Power Wire – Lower (602) by sliding plastic extrusion on connector under plastic clip on second connector . STEP3-B).
http://www.yowzafitness.com/ 15 STEP4 ASSEMBLY Step 4-A 106 Step 4 505 494 521 Step 4-B A 516 106 106 Step 4-C 521 494 505 702 402 106 STEP4-A). Slide the 20x79.9 Bolt (505) through the Wave Washer (521) & 0.5mm Washer (494) , Pedal Arm, and Pedal Swing Arm (108) then secure by 8mm Allen Key (C). STEP4-B). Secure the Back Out Screw (516) to the Pedal Swing Arm (108) using the 2.5mm Allen Key (A) 505 X2 494 X2 NOTE: PLEASE FULLY TIGHTEN Screw (516). STEP4-C).
16 YOWZA MIAMI ELLIPTICAL STEP5 ASSEMBLY Step 5-A Step 5 118 503 119 C 502 104 118 503 701 501 701 Step 5-B 501 501 118 501 502 104 701 STEP5-A). Connect the Action Arm to the Moving Linkage and secure using the M8x10mm Bolt (502) and M8x15mm Bolt (503) by 6mm Allen Key (D). Do not over tighten or squeaking may occur. 502 X2 SETP5-B). Assemble the Action Handlebar Lower Cover (701) to the Action Handlebar and secure using the Cone Point Screw (501).
http://www.yowzafitness.com/ STEP6 ASSEMBLY STEP6-A). Connect the Moving Handlebar (102) to Console Upright Assembly (A2). STEP6-B). Use M6x20mm Allen Head Bolt (514) to connect Moving Handlebar (102). STEP6-C). Tight the Allen Head Bolts (514) by 5mm Allen Key (B).
18 YOWZA MIAMI ELLIPTICAL STEP7 ASSEMBLY Step 7-B Step 7-A 463 Step 7 Step 7-C 601 607 Step 7-D 609 607 G 461 609 STEP7-A). First, take off two M6x15mm Screws (463) from the Button Control Panel (A1). STEP7-B). Open the Panel like step B picture. STEP7-C). Connect 8Pin Power Wire – Upper (601) to the Panel, and connect 2 Pin Hand Pulse Sensor Wire – Lower (609) to 2 Pin Hand Pulse Sensor Wire –Upper(607) STEP7-D).
http://www.yowzafitness.com/ STEP8 ASSEMBLY Step 8 52 2 51 8 70 9 10 1 Step8-1 8-A Step 70 9 51 8 52 2 STEP8-A). Attach the Water Bottle Holder (709), and secure using Cone point screw (522) with Washer (518). Your cross trainer is now fully assembled.
20 YOWZA MIAMI ELLIPTICAL EXPLODED DIAGRAM 710 490 710 480 480 490 220 220 711 412 711 220 220 412 214 214 102 514 514 446 514 514 301 103 446 301 313 313 245 302 245 442 302 442 303 464 526 528 416 528 531 527 528 312 527 531 464 526 415 415 416 401 245 530 529 245 312 706 529 530 245 401 706 245 522 518 119 709 118 101 501 504 501 701 501 701 701 501 701 504 504 503 421 502 503 502 412 413 211 104 504 211 105 413 412 421
http://www.yowzafitness.
22 YOWZA MIAMI ELLIPTICAL EXPLODED DIAGRAM 108 108 425 438 221 418 437 334 438 402 224 217 458 217 425 438 402 311 437 222 437 217 516 426 217 418 425 425 437 201 425 222 517 202 435 424 437 329 219 508 507 334 425 329 330 411 219 331 429 332 333 435 517 435 109 435 333 625 233 419 409 447 445 448 227 226 432 112 624 410 405 417 230 418 425 437 203 488 405 460 411 437 439 460 417 410 228 113 425 414 425 459 411 625 446 231 405 404 623
http://www.yowzafitness.
24 YOWZA MIAMI ELLIPTICAL WIRE DIAGRAM 610 238 613 304 496 496 309 466 466 614 463 449 449 633 305 463 476 306 476 467 467 461 307 204 461 449 467 467 205 468 468 449 403 449 449
http://www.yowzafitness.
26 YOWZA MIAMI ELLIPTICAL STABILIZER ADJUSTMENT LEVEL ADJUSTMENT: To adjust the level of the MIAMI cross trainer simply rotate the Level Adjusters clockwise or counter clockwise. Tilt the cross trainer to access stabilizers.
http://www.yowzafitness.com/ 27 TRANSPORT INSTRUCTIONS TRANSPORT INSTRUCTIONS: The casters located on the rear of the unit allow for easy transport. Simply lift the front of the unit until the wheels touch the floor. Then roll the unit to a desired location.
28 YOWZA MIAMI ELLIPTICAL IMPORTANT STEPS Warning: Before using this product, please consult your personal physician for a complete physical examination. Frequent and strenuous exercise should be approved by your doctor first. If any discomfort should result from your use of this product, stop exercising and consult your doctor. Proper usage of this product is essential. Please read your manual carefully before exercising.
http://www.yowzafitness.com/ 29 MUSCLE CHART Targeted muscle groups: The exercise routine that is performed on this product will develop primarily lower body muscle groups. These muscle groups are shown in gray color on the chart below.
30 YOWZA MIAMI ELLIPTICAL STRETCHING ROUTINE Warm up and cool down: A successful exercise program consists of a warm-up, aerobic exercise, and a cool-down. Do the entire program at least two and preferably three times a week, resting for a day between workouts. After several months, you can increase your workouts to four or five times per week. Warming up is an important part of your workout, and should begin every session.
http://www.yowzafitness.com/ 31 WARRANTY NOTE: Save this document for your records. This warranty include all YOWZA “MIAMI” Products TO OBTAIN SERVICE: CALL 877-969-9240 OR EMAIL SERVICE@YOWZAFITNESS.COM to report a service issue or manufacturers defect.
32 YOWZA MIAMI ELLIPTICAL WARRANTY DISCLAIMER OF WARRANTIES AND LIMITATION OF REMEDIES: It is impossible to eliminate all risks inherently associated with use of the product. Personal injury or other unintended consequences may result because of factors beyond our control. WE MAKE NO OTHER WARRANTIES OF ANY KIND. EXPRESS OR IMPLIED, OTHER THAN THOSE EXPRESSLY SET FORTH WITHIN THIS DOCUMENT. ALL WARRANTIES OTHER THAN THE WARRANTIES EXPRESSLY PROVIDED HEREIN ARE SPECIFICALLY EXCLUDED.
http://www.yowzafitness.
34 YOWZA MIAMI ELLIPTICAL COMPUTER OPERATION DISPLAY FUNCTIONS: Press the START button to start exercise, 1. RESISTANCE Levels starts from L1 to L16, press RESISTANCE up/down to adjust the resistance levels. 2. INCLINE/MOTION Levels starts from L1 to L12, press INCLINE/MOTION up/down to adjust the incline/motion levels. STOP: Press STOP button to shut off console screen, and press any button of console to power the screen on. RESISTANCE LEVEL DISPLAY: Displays Resistance Level from L1 to L16.
http://www.yowzafitness.com/ 35 COMPUTER OPERATION 8 X 16 DOT MATRIX RESISTANCE LEVEL PROFILE DISPLAY: Displays all operating instructions prior to the workout and displays RESISTANCE level profile during the workout. ENGLISH/METRIC CONVERSION: The elliptical displays ENGLISH and METRIC information. When the display reads “MPH” it’s in ENGLISH mode and display “KM/H” is METRIC mode. You can see your current setting at the left lower corner of screen, ENGLISH or METRIC.
36 YOWZA MIAMI ELLIPTICAL COMPUTER OPERATION PROGRAM 4 – FAT BURN This program’s goal is to elevate your heart rate and maintain it for most of your workout. This program can be run at 8 different difficulty levels which can be adjusted during the program setup or during the workout. When you select this program, you are prompted to enter weight, difficulty setting (level 1-8), and program time. Use Resistance up/down keys to adjust value and press PROGRAM to continue. Finally, press START to begin.
http://www.yowzafitness.com/ 37 COMPUTER OPERATION PROGRAM 7 – ENDURANCE This program’s goal is to vary your resistance and incline/motion Level, taking you from peak to recovery. This program can be run at 8 different difficulty levels which can be adjusted during the program setup or during the workout. When you select this program, you are prompted to enter weight, difficulty setting (level 1-8), and program time. Use Resistance up/down keys to adjust value and press PROGRAM to continue.
38 YOWZA MIAMI ELLIPTICAL COMPUTER OPERATION PROGRAM 9 – TARGET HEART RATE CONTROL PROGRAM The TARGET HEART RATE CONTROL program is designed to keep the user training at their chosen heart rate level to achieve the proper workout result. A heart rate monitoring device must be used for this program: Contact Heart Rate Grips or Chest Belt Pulse Transmitter. The equipment provides a standard contact handgrip on the moving handle bar to sense the user’s heart beat during the workout.