User Guide
※
The specifications of any product may change without prior notice to improve performance.
6
①①
Fasten Nipples
Place a small washer on the motherboard. Then, put a nipple over it and fasten the nipple until the
Backplate for AMD64 is firmly attached to the motherboard on the opposite side of the CPU.
* A Retention Guide is not necessary for installing CNPS7700 on Socket 754/939/940.
③③
Install Grips and Bolts
Interlock the L-Type grips with the clip. Insert the two bolts
into the outer holes of the grips.
④④
Place FHS
Set the FHS at the center of the CPU. Screw the bolts
in slightly, and then tighten each bolt a few turns at a
time while alternating between the two until the nipples
are completely pressed against the grips.
⑤⑤
Connect Power (How to use FAN MATE 2)
◆ Please refer to FAN MATE 2 Installation and Usage on page 7.
②②
Apply Thermal Grease
Clean off particles and residue from the top of the
CPU then spread a thin layer of the included thermal
grease thoroughly on top of the CPU.
Bolt
Grip (L-Type)
Outer Hole
Grip (L-Type)
Nipple
3) AMD Sempron/AMD64 - 754/939/940
CPU (Lid)
Nipple
Motherboard
Small Washer
Backplate for AMD64