User manual

14
AUTOMATIC SWITCH OFF
(UPPER & LOWER OVENS)
Should you forget to switch the oven off after a
programme, or if the "ON" button is pressed
accidentally, the oven will switch off automatically.
In fact, in the case of manual functioning, the
programmer will switch the oven off automatically if
no other button is activated after a certain time. This
time varies according to the temperature setting of
the oven, and ranges from a minimum of 2 hours for
temperatures above 230°C, up to 8 hours for those
below 120°C.
At the end of automatic cooking, the oven will switch
off after a period of time, this depends on the tempe-
rature selected.
The time varies between 2 hours for temperatures
above 230°C, up 8 hours for those below 120°C.
CHILD SAFETY
To avoid children altering a selected programme or
temperature, the Child Safety facility can be
operated.
Press buttons 1 and 3 simultaneously for
approximately 5 seconds.
The padlock symbol will be displayed.
It is now only possible to select any programme
while simultaneously pressing button 1 "Child
safety".
To cancel the Child Safety Feature, press button 3
"ON". Then press button 1 and 2 simultaneously for
approximately 5 second and the padlock symbol will
disappear from the display.
Minute minder
Press button 8 and then buttons 10 or 11 to set the
desired time. This function can be used without
having to switch the oven on (ie: for boiling an egg on
a hob).
Call for technical assistance
The programmer display carries out a self check, in
order to verify that it is working correctly. If a problem
is identified the spanner symbol will be displayed in
the event of a breakdown a NUMBER will appear. If
NUMBERS 001 or 002 appear it means that the meat
probe is at fault and needs to be replaced; if a higher
number appears, please contact your nearest
Zanussi Service Force Centre quoting the number
of Fault Code.
NOTE:
Generally after about 8 seconds from pressing a
function button the programmer will allow the
selected function to operate. Should another button
be pressed during the operation of a selected
function the display will show momentarily details of
the function in progress. For the new command to be
accepted it will be necessary to press the other
button again.
CHILD SAFETY
123 56774