User manual

Press the or to set the correct time.
After approximately five seconds, the flashing stops
and the display shows the time of day you set.
CHANGING THE TIME
You cannot change the time of day if
the Duration or End function
operates.
Press again and again until the indicator for the
Time of Day function flashes.
To set a new time, refer to "Setting the time".
PREHEATING
Preheat the empty oven before first use.
Preheat the two ovens. Heat up one
oven at a time.
Set the functions listed below, if
applicable.
1. Set the function and the maximum
temperature.
2. Let the oven operate for 1 hour.
3. Set the function and set the maximum
temperature.
4. Let the oven operate for 15 minutes.
5. Turn off the oven and let it cool down.
Accessories can become hotter than usual. The
oven can emit an odour and smoke. Make sure that
the airflow in the room is sufficient.
HOB - DAILY USE
WARNING! Refer to Safety chapters.
HEAT SETTING
Symbols Function
Off position
1 - 6 Heat settings
Use the residual heat to decrease
energy consumption. Deactivate the
cooking zone approximately 5 - 10
minutes before the cooking process is
completed.
Turn the knob for the selected cooking zone to a
necessary heat setting.
To complete the cooking process, turn the knob to
the off position.
RESIDUAL HEAT INDICATOR
WARNING! There is a risk of burns
from residual heat.
The indicator comes on when a cooking zone is
hot, but it does not function if mains power is
disconnected.
HOB - HINTS AND TIPS
WARNING! Refer to Safety chapters.
COOKWARE
The bottom of the cookware must be
as thick and flat as possible.
Ensure pan bases are clean and dry
before placing on the hob surface.
Cookware made of enamelled steel
and with aluminium or copper bottoms
can cause a colour change on the
glass-ceramic surface.
8