Instruction book Freezer ZFT 710FW
This instruction book contains safety precautions, information on use and helpful hints and tips. To ensure you use this appliance effectively and safely, please read this instruction book carefully before installing or using this appliance and retain for future reference.
IMPOR TANT S AFET Y INS TR UCTIONS These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings or these warnings contact the Customer Care Department. edge, unless they have been given supervision or Prior to installation instruction concerning use of the appliance by a perCheck the appliance for transport damage.
Remove the plug and ensure that any locks or catches are removed, to prevent young children being trapped inside. Safety precautions for isobutane Warning The refrigerant isobutane (R 600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable. Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
Cont ents Instructions for the Installer Instructions for the User Guide to use the instruction book 2 Technical Specifications 11 Important Safety Information 3 Installing the Appliance 11 Instructions for the User General Information Description and main parts 6 6 6 Transportation, Unpacking Location Waste handling Ventilation Requirements 11 11 11 12 Switches and indicators Basket Storage Operation and use Installation Adjusting the temperature 7 7 7 7 7 Door Reversal 12 Electrical Conne
INS TR UCTIONS F OR THE USER General information This appliance is designed for the freezing and storage of frozen food in a domestic home. To ensure correct operation, the appliance should be located where the ambient temperature is between 16-32 °C. Description and main parts 1. Storing compartment 7. 2. Freezing compartment 8. Condenser Rating plate 9. Airflow direction 3. 6 Ventilation grid 4. Switches and indicators 10. Evaporator tray 5. Adjustable feet 11. Compressor 6.
higher temperature, you should set a position of lower number. Please allow 24 hours for the freezer temperature to stabilize between two adjustments.
Freezing and storage of frozen foods As freezing with "No-Frost" technology is quicker, the foods frozen this way will preserve their original form, nutritional value and taste even after thawing. Place the foods to be frozen in the lower part of the appliance. For the perfect operation of the appliance, make sure that the frozen foods will not touch the ventilator cover or the ventilator mounted in the rear of the product.
Maint enance & Cleaning Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply. Internal Cleaning Clean the inside and accessories with warm water and bicarbonate of soda (5 ml to 0.5 litre of water). No-Frost technology In order to facilitate the removal of the ice layer, the evaporator is assisted by electric heating during the defrosting procedure. The ventilator is in OFF position.
Something Not Working If the appliance is not working correctly, please carry out the following checks before contacting your local Zanussi Service Force Centre. Problem No power to the appliance The temperature in the appliance is too high Possible Cause Solution No power at the socket. Check there is power at the socket. There is a power cut. Check there is not a power cut by checking the household lights. The fuse has blown. Check the fuse has not blown. Thermostat control is set at „0“.
Ins tr uctions f or the Ins t aller Technical Specifications Model ZFT 710 FW Gross capacity (l) 100 Net capacity (l) 80 Width (mm) 595 Height (mm) 850 Depth (mm) Energy consumption 635 (kWh/day) 0.575 (kWh/year) 210 Energy class, according to EU Standards A Freezing capacity (kg/24h) 9 Rising time (h) 13 Rated current (A) 0,6 Weight (kg) 40 Installing the appliance Transportation, unpacking The appliance and the interior fitting are protected for transport.
Ventilation Requirements Remove the fridge door by gently pulling downwards and store to avoid damage. The appliance must have adequate ventilation to ensure correct operation. Unscrew the top door hinge pin of the refrigerator then screw it back on the other side. As shown in the second drawing. Diagram shows the ventilation requirements when installed: A* Under a worktop, or cupboard. * The clearance space of 10 cm above the appliance may be reduced to 5 cm providing a clearance space 2.
Electrical Connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. This appliance must be earthed. The manufacturer declines any liability should these safety measures not be observed. Important! The plug must still be accessible after the appliance has been installed. The appliance should not be connected to the electrical supply by means of an extension cable.
www.electrolux.com www.zanussi.co.