DE FR IT EN Benutzerinformation Notice d'utilisation Istruzioni per l’uso User manual Gefriergerät Congélateur Congelatore Freezer ZFU719EW 2 14 26 38
Inhalt Sicherheitshinweise _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Bedienblende _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Erste Inbetriebnahme _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Täglicher Gebrauch _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Praktische Tipps und Hinweise _ _ _ _ _ _ _ _ _ _ 2 4 6 6 6 Reinigung und Pflege _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 Was tun, wenn … _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Technische Daten _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Montage _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11 Hinweise zum Umweltschutz _ _ _
Kurzschlüsse und einen Brand verursachen und/oder zu Stromschlägen führen. Warnung! Elektrische Bauteile (Netzkabel, Stecker, Kompressor) dürfen nur vom Kundendienst oder einer Fachkraft ausgewechselt werden. 1. Das Netzkabel darf nicht verlängert werden. 2. Vergewissern Sie sich, dass der Netzstecker nicht von der Geräterückseite gequetscht oder beschädigt wird. Ein gequetschter oder beschädigter Netzstecker überhitzt und kann einen Brand verursachen. 3.
• Lassen Sie das Gerät mindestens vier Stunden stehen, bevor Sie es elektrisch anschließen, damit das Öl in den Kompressor zurückfließen kann. • Ausreichenden Freiraum zur Luftzirkulation um das Gerät lassen; anderenfalls besteht Überhitzungsgefahr. Halten Sie sich für die Belüftung an die Installationsanweisungen. • Das Gerät sollte zur Vermeidung von Verbrennungen durch Berührung von heißen Bauteilen (Kompressor, Kondensator) möglichst mit der Rückseite gegen eine Wand aufgestellt werden.
hat, der für die sichere Aufbewahrung des Gefrierguts erforderlich ist. Ausschalten 1. Drehen Sie den Temperaturregler zum Ausschalten des Geräts in die Position „O“. 2. Ziehen Sie den Netzstecker aus der Steckdose, um das Gerät von der Stromversorgung zu trennen. Temperaturregelung Die Temperatur im Gefrierraum wird durch den Temperaturregler, der sich auf der Bedienblende befindet, geregelt.
Erste Inbetriebnahme Reinigung des Innenraums Bevor Sie das Gerät in Betrieb nehmen, beseitigen Sie den typischen "Neugeruch" am besten durch Auswaschen der Innenteile mit lauwarmem Wasser und einem neutralen Reinigungsmittel. Sorgfältig nachtrocknen. Wichtig! Verwenden Sie keine Reinigungsmittel oder Scheuerpulver, da hierdurch die Oberfläche beschädigt wird.
• frieren Sie ausschließlich frische und gründlich gewaschene Lebensmittel von sehr guter Qualität ein; • teilen Sie die Lebensmittel in kleinere Portionen ein, damit diese schnell und vollständig gefrieren und Sie später nur die Menge auftauen müssen, die Sie gerade benötigen; • die einzufrierenden Lebensmittelportionen sollten stets luftdicht in Aluminiumfolie oder in lebensmittelechte Gefrierbeutel verpackt werden, um so wenig Luft wie möglich in der Verpackung zu haben; • achten Sie beim Hineinlegen von
Wichtig! Stellen Sie den Temperaturregler bitte 12 Stunden vor dem Abtauen auf eine kühlere Einstellung, damit eine ausreichende Kälte als Reserve für die Unterbrechung des Betriebes entstehen kann. Entfernen Sie den Reif wie nachstehend erläutert: 1. Schalten Sie das Gerät ab und ziehen Sie den Netzstecker aus der Steckdose. 2. Nehmen Sie das gesamte Gefriergut heraus, verpacken Sie es in mehrere Schichten Zeitungspapier und lagern Sie es an einem kühlen Ort.
Problem Mögliche Ursache Abhilfe Das Gerät ist zu laut. Das Gerät steht nicht genau waagerecht auf dem Boden. Kontrollieren Sie, ob das Gerät stabil steht (alle vier Füße müssen fest auf dem Boden stehen). Der Kompressor arbeitet ständig. Der Temperaturregler ist falsch eingestellt. Stellen Sie eine höhere Temperatur ein. Die Türen schließen nicht richtig oder sind nicht fest geschlossen. Prüfen Sie, ob die Türen gut schließen und die Dichtungen unbeschädigt und sauber sind.
Problem Das Gerät funktioniert überhaupt nicht. Weder die Kühlung noch die Beleuchtung funktioniert. Das Gerät kühlt überhaupt nicht. Die grüne Kontrolllampe blinkt. Mögliche Ursache Abhilfe Der Stecker ist nicht richtig in die Steckdose gesteckt. Stecken Sie den Netzstecker richtig in die Steckdose. Das Gerät bekommt keinen Strom. Versuchen Sie, ein anderes elektrisches Gerät an die Steckdose anzuschließen. Das Gerät ist nicht eingeschaltet. Schalten Sie das Gerät ein.
Montage Vorsicht! Lesen Sie bitte die "Sicherheitshinweise" sorgfältig vor der Aufstellung des Geräts durch, um Gefahren für Sie selbst zu vermeiden und einen korrekten Betrieb des Geräts zu gewährleisten.
Wechseln des Türanschlags Wichtig! Die nachfolgend beschriebenen Tätigkeiten müssen mit Hilfe einer zweiten Person durchgeführt werden, um ein Herunterfallen der Türen zu vermeiden. Beim Wechseln des Türanschlags muss wie folgt vorgegangen werden: 8. Entfernen Sie das untere Scharnier. Stecken Sie es in Pfeilrichtung auf den Stift. 9. Lösen Sie die Schraube und bringen Sie sie an der gegenüberliegenden Seite wieder an. 10. Bringen Sie das untere 1. Ziehen Sie den Stecker 5.
Hinweise zum Umweltschutz Das Symbol auf dem Produkt oder seiner Verpackung weist darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall zu behandeln ist, sondern an einem Sammelpunkt für das Recycling von elektrischen und elektronischen Geräten abgegeben werden muss. Durch Ihren Beitrag zum korrekten Entsorgen dieses Produkts schützen Sie die Umwelt und die Gesundheit Ihrer Mitmenschen. Umwelt und Gesundheit werden durch falsches Entsorgen gefährdet.
Sommaire Consignes de sécurité _ _ _ _ _ _ _ _ _ _ _ _ _ _ Bandeau de commande _ _ _ _ _ _ _ _ _ _ _ _ _ Première utilisation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Utilisation quotidienne _ _ _ _ _ _ _ _ _ _ _ _ _ _ Conseils utiles _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 14 16 18 18 18 Entretien et nettoyage _ _ _ _ _ _ _ _ _ _ _ _ _ _ En cas d'anomalie de fonctionnement _ _ _ _ _ _ _ Caractéristiques techniques _ _ _ _ _ _ _ _ _ _ _ Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ En matière de sauvegarde de l'envir
de courts-circuits, d'incendies et/ou de décharges électriques. Avertissement Les composants électriques (cordon d'alimentation, prise, compresseur) doivent être remplacés par un technicien d’entretien agréé ou par un électricien spécialisé. 1. L'appareil ne doit pas être raccordé à l'aide d'un prolongateur, d'une prise multiple ou d'un raccordement multiple (risque d'incendie). 2. Assurez-vous que la prise n'est pas écrasée ou endommagée par l'arrière de l'appareil.
• Il est conseillé d'attendre au moins quatre heures avant de brancher l'appareil pour que le circuit frigorifique soit stabilisé. • Veillez à ce que l'air circule librement autour de l'appareil pour éviter qu'il ne surchauffe. Pour assurer une ventilation suffisante, respectez les instructions de la notice (chapitre Installation). • Placez l'appareil dos au mur pour éviter tout contact avec le compresseur et le condenseur (risque de brûlure).
7. Lorsque l'on allume le congélateur pour la première fois, le voyant Alarme rouge clignote jusqu'à ce que la température interne atteigne le niveau requis pour assurer une conservation sûre des produits congelés. Lorsque l'on allume le congélateur pour la première fois, le voyant Alarme rouge clignote jusqu'à ce que la température interne atteigne le niveau requis pour assurer une conservation sûre des produits congelés. Mise à l'arrêt Fonction Congélation Rapide 1.
Première utilisation Nettoyage intérieur Avant d'utiliser l'appareil pour la première fois, nettoyez l'intérieur et tous les accessoires internes avec de l'eau tiède savonneuse pour supprimer l'odeur caractéristique du "neuf" puis séchez soigneusement. Important N'utilisez pas de produits abrasifs, poudre à récurer, éponge métallique pour ne pas abîmer la finition.
• enveloppez les aliments dans des feuilles d'aluminium ou de polyéthylène et assurez-vous que les emballages sont étanches ; • ne laissez pas des aliments frais, non congelés, toucher des aliments déjà congelés pour éviter une remontée en température de ces derniers.
3. Maintenez la porte ouverte et utilisez la spatule en plastique comme gouttière en l'insérant dans l'emplacement prévu à cet effet. Placez au-dessous un récipient pour recueillir l'eau de dégivrage. Le dégivrage peut être accéléré en plaçant dans le compartiment congélateur un ou plusieurs récipients d'eau chaude non bouillante, à l'exclusion de toute autre source de chaleur.
Anomalie Cause possible Solution Trop de produits frais ont été introduits dans l'appareil. Attendez quelques heures et vérifiez de nouveau la température Les aliments introduits dans l'appareil étaient trop chauds. Laissez refroidir les aliments à température ambiante avant de les ranger dans l'appareil. La température ambiante est trop éle- Réduisez la température ambiante. vée. Il y a trop de givre et de glace. La température à l'intérieur du congélateur est trop élevée.
Anomalie Cause possible Solution La prise de courant n'est pas alimen- Faites appel à un électricien qualifié. tée (essayez de brancher un autre appareil dans la prise). Clignotement du voyant vert L'appareil n'est pas sous tension. Mettez l'appareil en fonctionnement Le thermostat n'est pas sur Vérifiez la position du thermostat Capteur de température défectueux Faites appel au service après-vente Fermeture de la porte 1. Nettoyez les joints de la porte. 2. Si nécessaire, ajustez la porte.
1. Introduisez les entretoises dans les orifices. Veillez à ce que la flèche (A) se trouve dans la position illustrée sur la photo. 2. Tournez les entretoises de 45° dans le sens inverse des aiguilles d'une montre, jusqu'à ce qu'elles se bloquent. Mise à niveau A 45˚ Lorsque vous installez l'appareil, veillez à le placer de niveau. Servezvous des deux pieds réglables se trouvant à l'avant de l'appareil (2). Si besoin est, réglez les pieds en retirant l'entretoise (1).
1. Débranchez l'appareil électriquement. 2. Inclinez l'appareil avec précaution vers l'arrière pour que le compresseur ne touche pas le sol. 3. Dévissez les deux pieds réglables. 4. Dévissez les vis de la charnière inférieure de la porte. 5. Retirez la porte de l'appareil en la tirant légèrement vers le haut. 6. Dévissez la goupille de la charnière de la porte supérieure de l'appareil puis revissez-la de l'autre côté. 7.
ce produit, veuillez prendre contact avec le bureau municipal de votre région, votre service d’élimination des déchets ménagers ou le magasin où vous avez acheté le produit. Où aller avec les appareils usagés? Partout où des appareils neufs sont vendus, mais aussi dans un centre de collecte ou une entreprise de récupération officiels SENS. La liste des centres de collecte officiels SENS est disponible sous www.sens.ch.
Indice Informazioni per la sicurezza _ _ _ _ _ _ _ _ _ _ _ Pannello dei comandi _ _ _ _ _ _ _ _ _ _ _ _ _ _ Primo utilizzo _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Utilizzo quotidiano _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Consigli e suggerimenti utili _ _ _ _ _ _ _ _ _ _ _ 26 28 29 30 30 Pulizia e cura _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Cosa fare se… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Dati tecnici _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Installazione _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Considerazioni ambientali _ _
Avvertenza Tutti i componenti elettrici (cavo di alimentazione, spina, compressore) devono essere sostituiti da un tecnico certificato o da personale d'assistenza qualificato. 1. Non collegare prolunghe al cavo di alimentazione. 2. Evitare che il lato posteriore dell'apparecchiatura possa schiacciare o danneggiare la spina, causandone il surriscaldamento con un conseguente rischio di incendio. 3. La spina dell'apparecchiatura deve trovarsi in una posizione accessibile. 4.
• Attorno all'apparecchio vi deve essere un'adeguata circolazione dell'aria, altrimenti si può surriscaldare. Per ottenere una ventilazione sufficiente seguire le istruzioni di installazione. • Se possibile il retro dell'apparecchio dovrebbe essere posizionato contro una parete per evitare di toccare le parti calde o di rimanervi impigliati (compressore, condensatore), evitando così possibili scottature. • L'apparecchio non deve essere posto vicino a radiatori o piani di cottura a gas.
Spegnimento 1. Per spegnere l’apparecchiatura, ruotare il regolatore della temperatura in posizione "O". 2. Per scollegare l’apparecchiatura dalla corrente elettrica, staccare la spina dalla presa a parete. Regolazione della temperatura La temperatura all'interno dell'apparecchiatura è controllata dal Regolatore della Temperatura che si trova sul Pannello dei comandi.
Utilizzo quotidiano Congelazione di alimenti freschi I vani congelatore (il secondo e terzo contenitore) sono adatti alla congelazione di cibi freschi e alla conservazione a lungo termine di alimenti congelati e surgelati. Per la congelazione di cibi freschi azionare la funzione di congelamento rapido. La quantità massima di cibo che può essere congelata in 24 ore è riportata sulla targhetta del modello , un'etichetta che si trova all'interno dell'apparecchiatura.
Consigli per la conservazione dei surgelati Per ottenere i migliori risultati con questo apparecchio: • Accertare che i cibi congelati commercialmente siano adeguatamente conservati dal rivenditore. • Fare in modo che i cibi congelati siano trasferiti dal negozio al congelatore nel più breve tempo possibile. • Non aprire la porta frequentemente o lasciarla aperta più del tempo strettamente necessario. • Una volta scongelato, il cibo si deteriora rapidamente e non può essere ricongelato.
5. Accendere l’apparecchiatura. 6. Girare il termostato sulla posizione di << -18 °C >> e lasciarlo in funzione per almeno 4 ore in modalità congelamento rapido. 7. Dopo 4 ore reintrodurre nel vano congelatore gli alimenti precedentemente rimossi. Avvertenza Per rimuovere la brina dall'evaporatore, non usare utensili metallici appuntiti che possano danneggiarlo. Non usare dispositivi elettrici o altri strumenti artificiali non raccomandati dal produttore allo scopo di accelerare il processo di sbrinamento.
Problema Presenza di brina eccessiva. La temperatura all'interno del congelatore è troppo alta Possibile causa Soluzione Gli alimenti introdotti nell'apparecchiatura erano troppo caldi. Prima di introdurre alimenti caldi nel congelatore, lasciarli raffreddare a temperatura ambiente. La temperatura ambiente è troppo alta. Abbassare la temperatura ambiente. Gli alimenti non sono avvolti correttamente. Avvolgere correttamente gli alimenti.
Problema Spia verde lampeggiante Possibile causa Soluzione Nella presa di alimentazione non è presente tensione (provare a collegarvi un'altra apparecchiatura elettrica) Rivolgersi a un elettricista. L'apparecchiatura non è accesa. Accendere l'apparecchiatura Il regolatore della temperatura non è acceso Controllare il regolatore della temperatura Problema nel sensore di temperatura Contattare il servizio assistenza Chiusura della porta 1. Pulire le guarnizioni della porta. 2.
1. Inserire i distanziatori nei fori. Controllare che la freccia (A) sia posizionata come illustrato nella figura. 2. Ruotare i distanziatori di 45° in senso antiorario finché si bloccano in posizione. Livellamento A 45˚ L'apparecchiatura deve trovarsi perfettamente in piano. Per correggere gli eventuali dislivelli è possibile regolare in altezza i due piedini anteriori (2). Qualora ciò fosse necessario, regolare i piedini rimuovendo il distanziatore (1).
1. Estrarre la spina dalla presa di alimentazione. 2. Inclinare l'apparecchiatura verso la parte posteriore facendo attenzione, in modo che il compressore non tocchi il pavimento. 3. Svitare i due piedini regolabili. 4. Rimuovere le viti dalla cerniera inferiore della porta. 8. Rimuovere la cerniera inferiore. Inserire il perno nella direzione della freccia. 9. Rimuovere la vite e installarla sul lato opposto. 10. Installare la cerniera inferiore su lato opposto, lasciando invariata la po5.
contribuisce a evitare potenziali conseguenze negative, che potrebbero derivare da uno smaltimento inadeguato del prodotto. Per informazioni più dettagliate sul riciclaggio di questo prodotto, contattare l’ufficio comunale, il servizio locale di smaltimento rifiuti o il negozio in cui è stato acquistato il prodotto.
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Helpful Hints and Tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ 38 40 41 41 42 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Environmental concerns _ _ _ _ _
squashed or damaged power plug may overheat and cause a fire. 3. Make sure that you can come to the mains plug of the appliance. 4. Do not pull the mains cable. 5. If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire. 6. You must not operate the appliance without the lamp cover13) of interior lighting. • This appliance is heavy. Care should be taken when moving it.
Service erant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. The insulation foam contains flammable gases: the appliance shall be disposed according to the applicable regulations to obtain from your local authorities. Avoid damaging the cooling unit, especially at the rear near the heat exchanger. The materials used on this apare recyclable.
• the location of the appliance. Red Alarm Indicator Light Under normal operating conditions, the internal temperature of the freezer will ensure the long-term conservation of the stored food. When such temperature rises above a certain level (-12 °C), the appliance will trigger an acoustic and light alarm. The light alarm is a blink red light (Red Alarm Indicator Light), while the acoustic alarm is an intermittent sound. You can stop the acoustic alarm by pressing the Acoustic Signal Stop Switch once.
Thawing Deep-frozen or frozen food, prior to being used, can be thawed at room temperature. Small pieces may even be cooked still frozen, directly from the freezer: in this case, cooking will take longer. Helpful Hints and Tips Normal Operating Sounds • You may hear a faint gurgling and a bubbling sound when the refrigerant is pumped through the coils or tubing. This is correct.
cleaner. This operation will improve the performance of the appliance and save electricity consumption. Important! Take care of not to damage the cooling system. Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason it is recommended that the outer casing of this appliance is only cleaned with warm water with a little washing-up liquid added. After cleaning, reconnect the equipment to the mains supply.
Important! There are some sounds during normal use (compressor, refrigerant circulation). current. That is why you must not touch the electrical parts of the appliance before breaking the circuit.
Problem The appliance does not cool at all Green indicator flashing Possible cause Solution Power does not reach the appliance Try connecting another electrical device to the power outlet The appliance is not switched on Switch on the appliance There is no voltage in the mains socket (try to connect another appliance into it) Call an electrician Plug is not connected to the mains socket properly Connect the mains plug properly There is no voltage in the mains socket (try to connect another appl
Climate class Ambient temperature SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C Levelling When placing the appliance ensure that it stands level. This can be achieved by two adjustable feet at the bottom in front (2). If necessary adjust the feet by removing the spacer (1). Rear spacers 1 2 In the bag with the documentation, there are two spacers which must be fitted as shown in the figure. 1. Fit the spacers into the holes.
1. Remove the plug from the power socket. 2. Tilt back the appliance carefully so that the compressor cannot touch the floor. 3. Unscrew both adjustable feet. 4. Unscrew the screws of the door bottom hinge. 5. Take off the appliance door by pulling it slightly downwards. 6. Unscrew the top door hinge pin of the appliance then screw it back on the other side. 7. Fit the appliance door on the upper door hinge pin. 8. Remove the lower hinge. Put over the pin in the direction of the arrow. 9.
200383679 - A - 322010 www.zanussi.