NL EN FR DE Gebruiksaanwijzing User Manual Notice d'utilisation Benutzerinformation Koelkast Refrigerator Réfrigérateur Kühlschrank ZRA21600WA 2 13 23 34
Inhoudsopgave Veiligheidsinformatie Veiligheidsvoorschriften Bediening Het eerste gebruik Dagelijks gebruik 2 3 4 5 5 Aanwijzingen en tips Onderhoud en reiniging Probleemoplossing Montage Technische informatie 5 6 7 9 12 Wijzigingen voorbehouden. Veiligheidsinformatie Lees zorgvuldig de meegeleverde instructies voor installatie en gebruik van het apparaat. De fabrikant is niet verantwoordelijk voor letsel en schade veroorzaakt door een foutieve installatie.
• • • • • • • Gebruik geen mechanische of andere middelen om het ontdooiproces te versnellen, behalve die middelen die door de fabrikant zijn aanbevolen. Let op dat u het koelcircuit niet beschadigt. Gebruik geen elektrische apparaten in de koelkast, tenzij deze door de fabrikant worden aanbevolen. Gebruik geen waterstralen of stoom om het apparaat te reinigen. Maak het apparaat schoon met een vochtige, zachte doek. Gebruik alleen neutrale schoonmaakmiddelen.
• • • beschadigt. Neem contact met de Servicedienst of een elektrotechnicus om de elektrische onderdelen te wijzigen. De stroomkabel moet lager blijven dan het niveau van de stopcontact. Steek de stekker pas in het stopcontact als de installatie is voltooid. Zorg ervoor dat het netsnoer na installatie bereikbaar is. Trek niet aan het netsnoer om het apparaat los te koppelen. Trek altijd aan de stekker. Onderhoud en reiniging WAARSCHUWING! Gevaar voor letsel of schade aan het apparaat.
Ga als volgt te werk om het apparaat in werking te stellen: • zet de temperatuurknop op een lagere stand om de minimale koelte te verkrijgen. • zet de temperatuurknop op een hogere stand om de maximale koelte te verkrijgen. • • de hoeveelheid voedsel die wordt bewaard de plaats van het apparaat Als de omgevingstemperatuur hoog is of als het apparaat volledig gevuld is en de thermostaatknop op de koudste instelling staat, kan het apparaat continu werken waardoor er ijs op de achterwand wordt gevormd.
• • • Een zoemend en kloppend geluid van de compressor als het koelmiddel wordt rondgepompt. Een plotseling krakend geluid uit de binnenkant van het apparaat veroorzaakt door thermische uitzetting (een natuurlijk en ongevaarlijk natuurkundig fenomeen). Een zacht klikkend geluid van de thermostaat als de compressor aan of uit gaat. Tips voor energiebesparing • • De deur niet vaker openen of open laten staan dan strikt noodzakelijk.
Het apparaat moet regelmatig worden schoongemaakt: 1. Maak de binnenkant en de accessoires schoon met lauw water en wat neutrale zeep. 2. Controleer de afdichtingen regelmatig en wrijf ze schoon om u ervan te verzekeren dat ze schoon en vrij van restjes zijn. 3. Spoel ze af en maak ze grondig droog. 4. Maak indien toegankelijk de condensor en de compressor aan de achterkant van het apparaat schoon met een borstel.
Probleem Het lampje werkt niet. De compressor werkt continu. Mogelijke oorzaak Oplossing Het lampje staat in de stand-by Sluit en open de deur. stand. Het lampje is stuk. Zie 'Het lampje vervangen'. De temperatuur is goed ingesteld. Raadpleeg het hoofdstuk 'Bediening'. Er worden veel producten tegelijk geplaatst. Wacht een paar uur en controleer dan nogmaals de temperatuur. De omgevingstemperatuur is te Zie het typeplaatje voor de klimaathoog. klasse.
Het lampje vervangen Trek de stekker uit het stopcontact. 1. Verwijder de schroef van de afdekking van het lampje. 2. Verwijder de afdekking van het lampje (raadpleeg de afbeelding). bedoeld is voor huishoudelijke apparaten (het maximumvermogen is vermeld op de afdekking van het lampje). 4. Plaats de afdekking van het lampje terug. 5. Draai de schroef van de afdekking van het lampje vast. 6. Steek de stekker in het stopcontact. 7. Open de deur. Controleer of het lampje gaat branden. De deur sluiten 3.
Omkeerbaarheid van de deur Nivellering Zorg ervoor dat het apparaat waterpas staat wanneer u het plaatst. Deze stand kan bereikt worden met de twee afstelbare voetjes die aan de voorkant en onderkant van het apparaat bevestigd zijn. WAARSCHUWING! Voordat werkzaamheden worden uitgevoerd, moet u zich ervan verzekeren dat de stekker uit het stopcontact is getrokken.
Voer een eindcontrole uit en verzeker u ervan dat: • Alle schroeven zijn aangedraaid. • De magnetische afdichtstrip vast zit aan de kast. • De deur goed open en dicht gaat. Als de omgevingstemperatuur laag is (bijv. in de winter), kan het zijn dat het deurrubber niet precies op de kast past. Wacht in dat geval tot de afdichting zich op een natuurlijke wijze zet. Als u bovenstaande handelingen liever niet zelf uitvoert, neem dan contact op met de dichtstbijzijnde klantenservice.
Technische informatie Technische gegevens Hoogte mm 1050 Breedte mm 550 Diepte mm 612 Spanning Volt 230 - 240 Frequentie Hz 50 De technische gegevens staan op het typeplaatje aan de bonne- of buitenkant van het apparaat en op het energielabel. MILIEUBESCHERMING Recycle de materialen met het symbool . Gooi de verpakking in een geschikte verzamelcontainer om het te recyclen. Help om het milieu en de volksgezondheid te beschermen en recycle het afval van elektrische en elektronische apparaten.
Contents Safety information Safety instructions Operation First use Daily use 13 14 15 16 16 Hints and tips Care and cleaning Troubleshooting Installation Technical information 16 17 18 20 22 Subject to change without notice. Safety information Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages.
• • • • • • • Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. Do not damage the refrigerant circuit. Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer. Do not use water spray and steam to clean the appliance. Clean the appliance with a moist soft cloth. Only use neutral detergents.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. Care and cleaning WARNING! Risk of injury or damage to the appliance. Use WARNING! • • • • • • • • Risk of injury, burns, electrical shock or fire. • Do not change the specification of this appliance. Do not put electrical appliances (e.g. ice cream makers) in the appliance unless they are stated applicable by the manufacturer. Be careful not to cause damage to the refrigerant circuit.
If the ambient temperature is high or the appliance is fully loaded, and the appliance is set to the lowest temperature, it may run continuously causing frost to form on the rear wall. In this case the dial must be set to a higher temperature to allow automatic defrosting and therefore reduced energy consumption. First use Cleaning the interior CAUTION! Do not use detergents or abrasive powders, as these will damage the finish.
continuously, causing frost or ice on the evaporator. If this happens, set the Temperature Regulator toward warmer settings to allow automatic defrosting and so a saving in electricity consumption.
Periods of non-operation back of the appliance, over the motor compressor, where it evaporates. It is important to periodically clean the defrost water drain hole in the middle of the refrigerator compartment channel to prevent the water overflowing and dripping onto the food inside. When the appliance is not in use for long periods, take the following precautions: 1. Disconnect the appliance from electricity supply. 2. Remove all food. 3. Clean the appliance and all accessories. 4.
Problem Possible cause Solution The door is not closed correctly. Refer to "Closing the door". The water outlet is clogged. Clean the water outlet. Food products prevent that water flows into the water collector. Make sure that food products do not touch the rear plate. Water flows on the floor. The melting water outlet is not connected to the evaporative tray above the compressor. Attach the melting water outlet to the evaporative tray. Door is misaligned or interferes with ventilation grill.
Closing the door 1. Clean the door gaskets. 2. If necessary, adjust the door. Refer to "Installation". 3. If necessary, replace the defective door gaskets. Contact the After Sales Service. Installation WARNING! 2 Refer to Safety chapters.
min. 100 mm 15 mm 15 mm Door reversibility WARNING! Before carrying out any operations, remove the plug from the power socket. CAUTION! To carry out the following operations, we suggest that this be made with another person that will keep a firm hold on the doors of the appliance during the operations. 5. Unscrew and install the screw on the opposite side. 6. Install the hinge on the opposite side. 7. Screw the right foot. 8. Unscrew the screws of the door top hinge. 9. Remove the hinge.
Electrical connection Do a final check to make sure that: • All screws are tightened. • The magnetic seal adheres to the cabinet. • The door opens and closes correctly. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket. In case you do not want to carry out the above mentioned operations, contact the nearest After Sales Service Force.
Table des matières Consignes de sécurité Instructions de sécurité Fonctionnement Première utilisation Utilisation quotidienne 23 24 26 26 26 Conseils Entretien et nettoyage En cas d'anomalie de fonctionnement Installation Caractéristiques techniques 27 28 29 31 33 Sous réserve de modifications. Consignes de sécurité Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies.
• • • • • • • • Veillez à ce que les orifices de ventilation, situés dans l'enceinte de l'appareil ou dans la structure intégrée, ne soient pas obstrués. N'utilisez aucun dispositif mécanique ou autre appareil pour accélérer le processus de dégivrage que ceux recommandés par le fabricant. N'endommagez pas le circuit frigorifique. N'utilisez pas d'appareils électriques à l'intérieur des compartiments de conservation des aliments de l'appareil, sauf s'ils sont du type recommandé par le fabricant.
• • • • • • • • L'ensemble des branchements électriques doit être effectué par un technicien qualifié. Vérifiez que les données électriques figurant sur la plaque signalétique correspondent à celles de votre réseau. Si ce n'est pas le cas, contactez un électricien. Utilisez toujours une prise de courant de sécurité correctement installée. N'utilisez pas d'adaptateurs multiprises ni de rallonges.
Fonctionnement Mise en marche Insérez la fiche dans la prise murale. Tournez le thermostat vers la droite sur une position médiane. Mise à l'arrêt Pour éteindre l'appareil, tournez le thermostat sur la position « O ». Réglage de la température La température est régulée automatiquement. Pour utiliser l'appareil, procédez comme suit : • tournez le thermostat vers le réglage minimal pour obtenir le niveau de froid minimal.
Mise en place des balconnets de la porte Selon la taille des emballages des aliments conservés, les balconnets de la porte peuvent être positionnés à différentes hauteurs. 1 3 2 1. Faites glisser le balconnet dans le sens des flèches jusqu'à ce qu'il se libère. 2. Repositionnez-le selon les besoins. Conseils Bruits normaux de fonctionnement • Les bruits suivants sont normaux lorsque l'appareil est en cours de fonctionnement : • • • • • Un léger gargouillis lorsque le liquide réfrigérant est pompé.
Entretien et nettoyage AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. Avertissements généraux ATTENTION! Débranchez l'appareil avant toute opération d'entretien et de nettoyage. Cet appareil contient des hydrocarbures dans son circuit de réfrigération ; l'entretien et la recharge ne doivent donc être effectués que par du personnel qualifié. Les pièces et accessoires de l'appareil ne doivent pas être lavés au lave-vaisselle.
En cas d'anomalie de fonctionnement AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. En cas d'anomalie de fonctionnement ... Problème L'appareil ne fonctionne pas du tout. Cause probable L'appareil est à l'arrêt. Solution Mettez l'appareil en marche. La fiche du câble d'alimentation Branchez correctement la fiche du n'est pas correctement insérée câble d'alimentation dans la prise dans la prise de courant. de courant. La prise de courant n'est pas alimentée.
Problème Cause probable Solution De l'eau coule sur le sol. Le tuyau d'évacuation de l'eau de dégivrage n'est pas raccordé au bac d'évaporation situé au-dessus du compresseur. Fixez le tuyau d'évacuation de l'eau au bac d'évaporation de l'eau de dégivrage. La porte n'est pas dans l'alignement ou touche la grille de ventilation. L'appareil n'est pas de niveau. Reportez-vous au chapitre « Mise de niveau ». La température à l'intérieur de l'appareil est trop basse/élevée.
Installation AVERTISSEMENT! 2 Reportez-vous aux chapitres concernant la sécurité.
min. 100 mm 15 mm 15 mm Réversibilité de la porte AVERTISSEMENT! Avant toute opération, débranchez la fiche de la prise électrique. ATTENTION! Pour effectuer les opérations suivantes, il est conseillé de se faire aider par une autre personne pour maintenir fermement les portes de l'appareil lors de toute manipulation. 5. Dévissez et installez la vis sur le côté opposé. 6. Mettez en place la charnière sur le côté opposé. 7. Vissez le pied droit. 8.
Branchement électrique Faites une dernière vérification pour vous assurer que : • Toutes les vis sont bien serrées. • Le joint magnétique adhère bien à l'appareil. • La porte s'ouvre et se ferme correctement. Si la température ambiante est basse (par exemple, en hiver), il se peut que le joint n'adhère pas parfaitement. Dans ce cas, attendez que le joint reprenne sa taille naturelle. Si vous ne souhaitez pas effectuer personnellement les opérations décrites ci-dessus, contactez votre service après-vente.
Inhaltsverzeichnis Sicherheitsinformationen Sicherheitsanweisungen Betrieb Erste Inbetriebnahme Täglicher Gebrauch 34 35 37 37 37 Tipps und Hinweise Reinigung und Pflege Fehlersuche Montage Technische Daten 38 39 40 42 44 Änderungen vorbehalten. Sicherheitsinformationen Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage.
• • • • • • • • Achten Sie darauf, dass die Belüftungsöffnungen im Gehäuse um das Gerät und in der Einbaunische nicht blockiert sind. Versuchen Sie nicht, den Abtauvorgang durch andere als vom Hersteller empfohlene mechanische oder sonstige Hilfsmittel zu beschleunigen. Beschädigen Sie nicht den Kältekreislauf. Betreiben Sie in den Lebensmittelfächern des Geräts keine anderen als die vom Hersteller empfohlenen Elektrogeräte. Reinigen Sie das Gerät nicht mit einem Wasser- oder Dampfstrahl.
• • • • • • • Stellen Sie sicher, dass die elektrischen Daten auf dem Typenschild den Daten Ihrer Stromversorgung entsprechen. Wenden Sie sich andernfalls an eine Elektrofachkraft. Schließen Sie das Gerät nur an eine ordnungsgemäß installierte Schutzkontaktsteckdose an. Verwenden Sie keine Mehrfachsteckdosen oder Verlängerungskabel. Achten Sie darauf, elektrische Bauteile (wie Netzstecker, Netzkabel und Kompressor) nicht zu beschädigen.
Betrieb Einschalten des Geräts Stecken Sie den Stecker in die Netzsteckdose. Drehen Sie den Temperaturregler im Uhrzeigersinn auf eine mittlere Einstellung. Ausschalten des Geräts Drehen Sie den Temperaturregler zum Ausschalten des Geräts in die Position „O“. Temperaturregelung Die Temperatur wird automatisch geregelt. Bedienen Sie das Gerät wie folgt: • Drehen Sie den Temperaturregler auf eine niedrigere Einstellung, um die minimal mögliche Kühlung zu erreichen.
Lagern verschieden großer Lebensmittelpackungen. 1. Ziehen Sie die Ablage langsam in Pfeilrichtung, bis sie sich löst. 2. Setzen Sie die Ablage in der gewünschten Höhe wieder ein. 1 3 2 Tipps und Hinweise Normale Betriebsgeräusche • Folgende Geräusche sind während des normalen Gerätebetriebs normal: • • • • • Ein leichtes Gurgeln und Blubbern, wenn das Kältemittel durch die Leitungen gepumpt wird.
Reinigung und Pflege WARNUNG! Siehe Kapitel Sicherheitshinweise. Allgemeine Warnhinweise ACHTUNG! Ziehen Sie vor jeder Wartungsmaßnahme immer den Netzstecker aus der Steckdose. Dieses Gerät enthält Kohlenwasserstoffe in seinem Kältekreislauf. Aus diesem Grund dürfen die Wartung und das Nachfüllen ausschließlich durch autorisiertes Fachpersonal erfolgen. Das Zubehör des Geräts und die Innenteile eignen sich nicht für die Reinigung im Geschirrspüler.
WARNUNG! Möchten Sie bei einer längeren Abwesenheit das Gerät weiterlaufen lassen, bitten Sie jemanden, gelegentlich die Temperatur zu prüfen, damit das Kühlgut bei einem möglichen Stromausfall nicht im Inneren des Geräts verdirbt. Fehlersuche WARNUNG! Siehe Kapitel Sicherheitshinweise. Was tun, wenn... Problem Das Gerät funktioniert nicht. Mögliche Ursache Lösung Das Gerät ist ausgeschaltet. Gerät einschalten. Der Hauptstecker steckt nicht korrekt in der Netzdose.
Problem Wasser läuft auf den Boden. Mögliche Ursache Lösung Der Schmelzwasserablauf ist nicht mit der Tauwasserschale über dem Kompressor verbunden. Schmelzwasserablauf mit Tauwasserschale verbinden. Tür falsch ausgerichtet oder kolli- Das Gerät ist nicht ausgerichdiert mit dem Belüftungsgitter. tet. Siehe "Ausrichtung". Die Gerätetemperatur ist zu niedrig/zu hoch. Der Temperaturregler ist nicht korrekt eingestellt. Höhere/niedrigere Temperatur einstellen. Tür nicht richtig geschlossen.
Montage WARNUNG! 2 Siehe Kapitel Sicherheitshinweise. Standort Installieren Sie dieses Gerät in einem trockenen, gut belüfteten Raum, in dem die Umgebungstemperatur mit der Klimaklasse übereinstimmt, die auf dem Typenschild des Geräts angegeben ist: Klimaklasse Umgebungstemperatur SN +10 °C bis +32 °C N +16 °C bis +32 °C ST +16 °C bis +38 °C T +16 °C bis +43 °C Bei einigen Modellen können Funktionsstörungen auftreten, wenn sie außerhalb dieses Temperaturbereichs betrieben werden.
min. 100 mm 15 mm 15 mm Wechseln des Türanschlags WARNUNG! Vor der Durchführung von Arbeiten am Gerät ist stets der Netzstecker aus der Steckdose zu ziehen. ACHTUNG! Die nachfolgend beschriebenen Schritte sollten von mindestens zwei Personen durchgeführt werden, um ein Herunterfallen der Türen zu vermeiden. 1. Lösen Sie die beiden Schrauben an der Rückseite. 5. Lösen Sie die Schraube und bringen Sie sie an der gegenüberliegenden Seite wieder an. 6.
Elektrischer Anschluss 1 • 3 2 • Führen Sie eine Endkontrolle durch, um sicherzustellen, dass: • Alle Schrauben fest angezogen sind. • Die Magnetdichtung am Gerät anliegt. • Die Tür ordnungsgemäß öffnet und schließt. Bei niedrigen Umgebungstemperaturen (z. B. im Winter) kann es vorkommen, dass die Türdichtung nicht richtig am Gerät anliegt. Warten Sie in diesem Fall ab, bis sich die Dichtung allmählich anpasst.
UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern. Recyceln Sie zum Umwelt- und Gesundheitsschutz elektrische und elektronische Geräte. Entsorgen Sie Geräte mit dem Symbol nicht mit dem Hausmüll. Bringen Sie das Gerät zu Ihrer örtlichen Sammelstelle oder wenden Sie sich an Ihr Gemeindeamt. www.zanussi.
www.zanussi.
www.zanussi.
212000755-A-162014 www.zanussi.